NSN A175AISSUEA

An item fabricated from electrically nonconductive material specifically designed to provide a support for mounting an electrical and/or an electronic component such as a semiconductor device, relay, or resistor into the next higher assembly. It isolates the component from the mounting surface of the next higher assembly, it may act as a strain relief to avoid damage to the component seal, and it may permit soldering of the component to the next higher assembly without damage. It includes holes, notches, or other provisions for physical alignment and spacing of electrical leads and/or other mounting facilities projecting from the component it mounts. It may also afford protection from shock or vibration. It may be either nonthermally conductive which protects the component from temperature changes in the next higher assembly or it may be thermally conductive which permits heat generated in the component to be drained out to a heat sink. For items whose function is electrical insulation only, see insulator, (as modified). Excludes:holder, (as modified); retainer, (as modified), and spacer, plate.

unable to decode adjustment device drive type, 3.000 inches maximum body height, 1.425 inches nominal body length, unable to decode adjustment method and quantity, 1.425 inches nominal body width.

NSN 5950-00-648-0471 Datasheet

(NSN) National Stock Number

5950-00-648-0471

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5950 - Coils and Transformers

(NIIN) National Item Identification Number

00-648-0471

Requires Demilitarization

Yes

(INC) Item Name Code

00777

Date

Tue, Jan 1, 1963

Schedule B Code

8548900100

Adjustment Device Drive Type

unable to decode

Adjustment Method And Quantity

unable to decode

Body Height

3.000 inches maximum

Body Length

1.425 inches nominal

Body Width

1.425 inches nominal

Coil Form Type

unable to decode

Distance Between Mounting Facility Centers

unable to decode

Inductance Rating

unable to decode

Inclosure Type

fully inclosed

Mounting Facility Quantity

unable to decode

Mounting Method

unable to decode

Nominal Thread Size

unable to decode

Rating Method

unable to decode

Reliability Indicator

not established

Terminal Type And Quantity

6 wire lead

Thread Quantity Per Inch

unable to decode

Thread Series Designator

unable to decode

Turn Quantity

unable to decode

Winding Conductor Size

unable to decode

Winding Function And Quantity

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000777

Cross Reference

CAGE Codes

82679

The Technical Material Corporation Dba T M C

Non-manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35355

Water Commodity

595 - Transformer, (machinery and parts),(less than 35 feet)

National Motor Freight Classification Item Number

063420

Questions & Answers

1. What is the FSCG of the NSN 5950-00-648-0471?

   The FSCG of the NSN 5950-00-648-0471 is 5950

2. Does the NSN 5950-00-648-0471 have a Schedule B code assigned?

   Yes, the Schedule B code is 8548900100

3. Does NSN 5950-00-648-0471 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5950-00-648-0471 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5950-00-648-0471 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5950-00-648-0471 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963