NSN A25141-028STD

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

unable to decode material, 1.364 inches nominal center hole diameter, 0.070 inches nominal cross-sectional height, o-ring cross-sectional shape style.

NSN 5330-01-117-0016 Datasheet

(NSN) National Stock Number

5330-01-117-0016

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5330 - Packing and Gasket Materials

(NIIN) National Item Identification Number

01-117-0016

Requires Demilitarization

Yes

(INC) Item Name Code

04521

Date

Fri, Aug 7, 1981

Schedule B Code

3926904500

Center Hole Diameter

1.364 inches nominal

Cross-Sectional Height

0.070 inches nominal

Cross-Sectional Shape Style

o-ring

Material

unable to decode

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0004521

Cross Reference

CAGE Codes

89326

Barksdale, Inc

U.s./canadian manufacturers

Freight Information

Schedule B & Trade

Schedule B

3926-90-4500

Description

gaskets,washers & other seals

End Use

12770 - Other industrial supplies

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

89399

(NAICS) North American Industrial Classification System

339991

Questions & Answers

1. What is the FSCG of the NSN 5330-01-117-0016?

   The FSCG of the NSN 5330-01-117-0016 is 5330

2. Does the NSN 5330-01-117-0016 have a Schedule B code assigned?

   Yes, the Schedule B code is 3926904500

3. Does NSN 5330-01-117-0016 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5330-01-117-0016 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5330-01-117-0016 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5330-01-117-0016 was assigned to the Federal Catalog?

   It was assigned 45 years ago, on Fri, Aug 7, 1981