NSN A3014549

no hole first leg hole arrangement style, square first leg style, 5.000 inches nominal center section width, 0.125 inches nominal center section thickness, 116.0 degrees minimum and 120.0 degrees maximum first leg angle.

NSN 5340-01-277-5034 Datasheet

(NSN) National Stock Number

5340-01-277-5034

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5340 - Commercial Hardware

(NIIN) National Item Identification Number

01-277-5034

Requires Demilitarization

Yes

(INC) Item Name Code

20354

Date

Fri, Apr 22, 1988

Schedule B Code

7605190000

Center Section Thickness

0.125 inches nominal

Center Section Width

5.000 inches nominal

First Leg Angle

116.0 degrees minimum and 120.0 degrees maximum

First Leg Hole Arrangement Style

no hole

First Leg Style

square

First Leg Thickness

0.125 inches nominal

First Leg Width

5.000 inches nominal

First Leg Length

7.500 inches nominal

Material Document And Classification

qq-a-250/11,t6 fed spec single material response

Material

aluminum alloy 6061

Special Features

both legs have a 120.0 deg turned edge; one 1.000 in. dia hole located on each turned edge; one 0.344 in. dia hole located on each rib stiffener

Second Leg Angle

116.0 degrees minimum and 120.0 degrees maximum

Second Leg Thickness

0.125 inches nominal

Second Leg Length

7.500 inches nominal

Second Leg Relationship To First Leg

identical

Style Designator

adjacent angles

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0020354

Cross Reference

CAGE Codes

31550

L3harris Technologies, Inc. Dba Harris Corporation

U.s./canadian manufacturers

80063

Us Army Communications & Electronics Materiel Readiness Command Logistics Engineering Dir

U.s./canadian manufacturers

Freight Information

Air Commodity

BZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

J - 100.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

05380

Water Commodity

713 - Metal hardware

National Motor Freight Classification Item Number

013120

Schedule B & Trade

Schedule B

7605-19-0000

Description

aluminum wire not alloyed of which the maximum cross-sectional dimension is 7mm or less

End Use

12300 - Finished metal shapes

Unit of Quantity

KG

USDA

Yes

(SITC) Standard International Trade Classification

68422

(NAICS) North American Industrial Classification System

331318

Questions & Answers

1. What is the FSCG of the NSN 5340-01-277-5034?

   The FSCG of the NSN 5340-01-277-5034 is 5340

2. Does the NSN 5340-01-277-5034 have a Schedule B code assigned?

   Yes, the Schedule B code is 7605190000

3. Does NSN 5340-01-277-5034 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5340-01-277-5034 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5340-01-277-5034 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5340-01-277-5034 was assigned to the Federal Catalog?

   It was assigned 38 years ago, on Fri, Apr 22, 1988