NSN A3019127

An item fabricated from electrically nonconductive material specifically designed to provide a support for mounting an electrical and/or an electronic component such as a semiconductor device, relay, or resistor into the next higher assembly. It isolates the component from the mounting surface of the next higher assembly, it may act as a strain relief to avoid damage to the component seal, and it may permit soldering of the component to the next higher assembly without damage. It includes holes, notches, or other provisions for physical alignment and spacing of electrical leads and/or other mounting facilities projecting from the component it mounts. It may also afford protection from shock or vibration. It may be either nonthermally conductive which protects the component from temperature changes in the next higher assembly or it may be thermally conductive which permits heat generated in the component to be drained out to a heat sink. For items whose function is electrical insulation only, see insulator, (as modified). Excludes:holder, (as modified); retainer, (as modified), and spacer, plate.

sincgars equipment end item identification.

NSN 5970-01-362-5902 Datasheet

(NSN) National Stock Number

5970-01-362-5902

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5970 - Electrical Insulators and Insulating Materials

(NIIN) National Item Identification Number

01-362-5902

Requires Demilitarization

Yes

(INC) Item Name Code

18296

Date

Tue, Aug 11, 1992

Schedule B Code

8546900000

End Item Identification

sincgars equipment

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0018296

Cross Reference

CAGE Codes

80063

Us Army Communications & Electronics Materiel Readiness Command Logistics Engineering Dir

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

53360

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

103300

Schedule B & Trade

Schedule B

8546-90-0000

Description

electrical insulators, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77324

(NAICS) North American Industrial Classification System

335932

Questions & Answers

1. What is the FSCG of the NSN 5970-01-362-5902?

   The FSCG of the NSN 5970-01-362-5902 is 5970

2. Does the NSN 5970-01-362-5902 have a Schedule B code assigned?

   Yes, the Schedule B code is 8546900000

3. Does NSN 5970-01-362-5902 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5970-01-362-5902 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5970-01-362-5902 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5970-01-362-5902 was assigned to the Federal Catalog?

   It was assigned 34 years ago, on Tue, Aug 11, 1992