NSN A507A088-101

A ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes:brace (as modified); bracket (1), mounting; and bracket, shelf.

breaks before makes single section rear contact switching action, contact load current rating, 20.0 milliamperes resistive load and 50.0 milliamperes inductive load dc at sea level contact load current rating, 250.0 milliamperes resistive load ac at sea level contact load current rating, unable to decode contact load current rating.

NSN 5930-01-172-9747 Datasheet

(NSN) National Stock Number

5930-01-172-9747

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

01-172-9747

Requires Demilitarization

Yes

(INC) Item Name Code

02134

Date

Wed, Feb 29, 1984

Schedule B Code

8536509020

Contact Load Current Rating

unable to decode

Contact Load Current Rating

Contact Load Current Rating

20.0 milliamperes resistive load and 50.0 milliamperes inductive load dc at sea level

Contact Load Current Rating

250.0 milliamperes resistive load ac at sea level

Contact Switching Action

breaks before makes single section rear

Contact Switching Action

unable to decode

Contact Voltage Rating In Volts

115.0 ac at sea levelunable to decode

Contact Voltage Rating In Volts

115.0 dc at sea level

Contact Voltage Rating In Volts

115.0 ac at sea level

Contact Voltage Rating In Volts

unable to decode

First Flat Length

0.250 inches nominal single actuator

Flat Height

0.094 inches nominal single actuator

Hazardous Locations/Environmental Protection

explosion proof and moisture resistant

Individual Section Quantity

1

Mounting Method

threaded bushing single mounting facility

Mounting Method

unable to decode

Nominal Thread Size

0.250 inches single mounting facility

Nominal Thread Size

unable to decode

Nonturn Device Type

flatted bushing at 6:00 oclock

Nonturn Device Type

flatted bushing at 12:00 oclock

Overall Diameter

0.781 inches nominal

Overall Length

2.165 inches nominal

Pole Quantity

1 single section front

Precious Material And Location

contact and terminal surfaces silver and contact and terminal surfaces gold

Precious Material

silver and gold

Rotor Through Connection Quantity

1 single section

Rotor Through Connection Quantity

unable to decode

Shaft Diameter

0.125 inches nominal single actuator

Shaft Type

round, flatted single actuator

Shaft Type

unable to decode

Shaft Length

0.625 inches nominal single actuator

Style Designator

tap, circular, bushing mount

Switch Actuator Indexing Position Quantity

5 single actuator

Switch Actuator Indexing Position Quantity

unable to decode

Switch Actuator Positioning Increment

30.0 degrees single actuator

Switch Actuator Positioning Increment

unable to decode

Switch Actuator Stop Device Type

fixed stop single actuator

Switch Actuator Stop Device Type

unable to decode

Switch Contact Basic Design

nonpile-up symmetrical

Terminal Type

tab, solder lug

Thread Class

2a single mounting facility

Thread Length

0.312 inches nominal single mounting facility

Thread Series Designator

unf single mounting facility

Throw Quantity

5 single section rear

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

C - Item contains combination of two or more precious metals (silver, gold, platinum).

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0002134

Cross Reference

CAGE Codes

81073

Grayhill Inc

U.s./canadian manufacturers

88818

Kearfott Corporation Div Guidance and Navigation Division

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8536-50-9020

Description

switches, rotary, rated at not over 5 a, for a voltage not exceeding 1,000 v

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77255

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5930-01-172-9747?

   The FSCG of the NSN 5930-01-172-9747 is 5930

2. Does the NSN 5930-01-172-9747 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536509020

3. Does NSN 5930-01-172-9747 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-01-172-9747 contain precious materials?

   Item contains combination of two or more precious metals (silver, gold, platinum).

5. Does NSN 5930-01-172-9747 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-01-172-9747 was assigned to the Federal Catalog?

   It was assigned 42 years ago, on Wed, Feb 29, 1984