NSN A6273

A motor which is designed to be operated from two independent voltage sources, in such a way that variations in one voltage source will determine the direction and speed of the motor. In the alternating current type the voltages are usually applied to a split-phase stator, whereas in the direct current type, one voltage is applied to the stator and the other to the armature. Low inertia and rapid reversibility are inherent characteristics of this type of motor. See also servomotor, automatic pilot.

0.188 inches face nominal width, webbed, offset, solid body style, w/ keyway both ends bore style, 45.0 rockwell c minimum and 50.0 rockwell c maximum overall hardness rating, 0.313 inches both ends bore nominal diameter.

NSN 3020-00-696-6167 Datasheet

(NSN) National Stock Number

3020-00-696-6167

(FSG) Federal Supply Group

30 - Mechanical Power Transmission Equipment

(FSC) Federal Supply Classification

3020 - Gears, Pulleys, Sprockets and Transmission Chain

(NIIN) National Item Identification Number

00-696-6167

Requires Demilitarization

Yes

(INC) Item Name Code

05466

Date

Tue, Jan 1, 1963

Schedule B Code

8483409000

Body Style

webbed, offset, solid

Bore Nominal Diameter

0.313 inches both ends

Bore Style

w/ keyway both ends

Face Nominal Width

0.188 inches

Hardness Rating

45.0 rockwell c minimum and 50.0 rockwell c maximum overall

Hub Nominal Diameter

0.500 inches first end

Hub Nominal Diameter

0.500 inches second end

Hub Style Designator

plain both ends

Keyway Nominal Width

0.064 inches both ends

Material Document And Classification

fed std 66 fed std single material response overall

Pitch Diameter

2.2500 inches nominal

Material

steel comp 4620 overall

Nominal Distance From Bore Center To Keyway Bottom

0.205 inches both ends

Nominal Distance Between Body Face And Protruding Hub End

0.062 inches first end

Nominal Overall Length

0.250 inches

Nominal Outside Diameter

2.274 inches

Pressure Angle

20.0000 degrees

Style Designator

one protruding hub, one flush hub

Surface Treatment

oxide overall

Teeth Quantity

108

Tooth Form

standard

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Source of Supply Code

S9C - Defense supply center columbus, ohio 43215

Pseudo Item Name Code

0005466

Cross Reference

CAGE Codes

03670

Tyco Fire Products Lp

U.s./canadian manufacturers

10741

Carlisle & Finch Co

U.s./canadian manufacturers

49576

Quincy Compressor Division of Coltec Industries Inc Dba Quincy Compressor Div Quincy Compressor

U.s./canadian manufacturers

52793

Saginaw Products Corporation Dba Cignys

U.s./canadian manufacturers

55683

Wheeler Fleet Solutions, Co.

U.s./canadian manufacturers

63002

Victor Technologies Inc

U.s./canadian manufacturers

63734

Kaitlin Corp

U.s./canadian manufacturers

63830

Olympic Wire & Cable Corp

Non-manufacturers

80850

Interline Brands, Inc. Dba J. A. Sexauer

Non-manufacturers

81834

Grote Industries Inc Dba Grote Manufacturing Co Div Military Products

U.s./canadian manufacturers

82205

Belfort Instrument Company

U.s./canadian manufacturers

83330

Dialight Corporation

U.s./canadian manufacturers

91967

Halsit Holdings Llc Div Halsit Holdings, Llc Dba Abbatron

U.s./canadian manufacturers

98889

Aerocontrolex Group, Inc. Div Talley Actuators

U.s./canadian manufacturers

Freight Information

Air Commodity

VZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Less than Carload Rating

S - 60.0

National Motor Freight Class Rating

W - Rating variable

Special Handling

Z - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

00000

Water Commodity

593 - Motors and parts, (machinery and parts),(less than 35 feet)

National Motor Freight Classification Item Number

197230

Schedule B & Trade

Schedule B

8483-40-9000

Description

gears and gearing, other than toothed wheels, chain sprockets and other transmission elements entered separately

End Use

21180 - Industrial machines, other

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

74840

(NAICS) North American Industrial Classification System

333612

Questions & Answers

1. What is the FSCG of the NSN 3020-00-696-6167?

   The FSCG of the NSN 3020-00-696-6167 is 3020

2. Does the NSN 3020-00-696-6167 have a Schedule B code assigned?

   Yes, the Schedule B code is 8483409000

3. Does NSN 3020-00-696-6167 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 3020-00-696-6167 contain precious materials?

   Precious metal content is unknown

5. Does NSN 3020-00-696-6167 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

6. When the NSN 3020-00-696-6167 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963