NSN A7391

A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see axle(1), shouldered. For items not having any of the above conditions see pin, shoulder, headless. Excludes:shaft(1), straight; and axle(1), straight.

1.250 inches nominal body width, 1.500 inches nominal body height, unable to decode center to center distance between mounting facilities parallel to width, unable to decode center to center distance between mounting facilities parallel to length, 1.250 inches nominal body length.

NSN 5950-00-950-7707 Datasheet

(NSN) National Stock Number

5950-00-950-7707

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5950 - Coils and Transformers

(NIIN) National Item Identification Number

00-950-7707

Requires Demilitarization

Yes

(INC) Item Name Code

00780

Date

Mon, Jan 1, 1962

Schedule B Code

8548900100

Body Height

1.500 inches nominal

Body Length

1.250 inches nominal

Body Width

1.250 inches nominal

Center To Center Distance Between Mounting Facilities Parallel To Width

unable to decode

Center To Center Distance Between Mounting Facilities Parallel To Length

unable to decode

Frequency Rating

Impedance Rating In Ohms

unable to decode

Inclosure Type

open

Maximum Transformer Power Rating

unable to decode

Mounting Facility Quantity

unable to decode

Mounting Hole Diameter

unable to decode

Mounting Method

Reliability Indicator

not established

Terminal Type And Quantity

4 tab, solder lug

Transformer Function

line

Winding Function And Quantity

Winding Operating Current

unable to decode

Winding Shielding Method

unable to decode

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000780

Cross Reference

CAGE Codes

05584

Autodyne Manufacturing Co Inc

U.s./canadian manufacturers

53292

Pegasus Inc

U.s./canadian manufacturers

97315

Ballastran Corp

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35355

Water Commodity

595 - Transformer, (machinery and parts),(less than 35 feet)

National Motor Freight Classification Item Number

063420

Questions & Answers

1. What is the FSCG of the NSN 5950-00-950-7707?

   The FSCG of the NSN 5950-00-950-7707 is 5950

2. Does the NSN 5950-00-950-7707 have a Schedule B code assigned?

   Yes, the Schedule B code is 8548900100

3. Does NSN 5950-00-950-7707 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5950-00-950-7707 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5950-00-950-7707 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5950-00-950-7707 was assigned to the Federal Catalog?

   It was assigned 64 years ago, on Mon, Jan 1, 1962