NSN A808CH

An item specifically designed to be used in the transfer of electrical energy to or from another conducting surface. Either the brush or the surface is continually moving during the transfer of energy. The brush is usually composed in part of some form of the element carbon. Includes: (1) a single brush either with or without an attached shunt (flexible wire lead) and/or a helical or flat type pressure spring; (2) a split brush composed of two or more pieces (wafers), which are used in place of one brush usually connected together by individual shunts to a common terminal; (3) paired brushes composed of two identical or non-identical brushes connected together by a common shunt either with or without pressure springs or connected by individual shunts to a common terminal, or with pressure springs and connected to a common bar, bracket or the like either with or without individual shunts; (4) multiple brushes composed of more than two identical or non-identical brushes without pressure springs connected by individual shunts to a common terminal, or with pressure springs and connected to a common bar, bracket or the like by individual shunts. Does not include moving contacts which make and slide past stationary contacts, but are stationary while the circuit is conducting, such as the sliding contacts on a rheostat or the stationary contact on a synchro. Excludes: contact, electrical; and contact assembly, electrical.

8.750 inches nominal first center to center distance between mounting holes, clamp cover attachment method, 1 square cover opening shape and quantity, 1 entrance quantity, hinged cover type.

NSN 5975-01-416-0682 Datasheet

(NSN) National Stock Number

5975-01-416-0682

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5975 - Electrical Hardware and Supplies

(NIIN) National Item Identification Number

01-416-0682

Requires Demilitarization

Yes

(INC) Item Name Code

06219

Date

Wed, Jul 12, 1995

Schedule B Code

8536908030

Cover Attachment Method

clamp

Cover Opening Shape And Quantity

1 square

Cover Type

hinged

Entrance Quantity

1

First Center To Center Distance Between Mounting Holes

8.750 inches nominal

Inside Depth

4.000 inches nominal

Inside Length

8.000 inches nominal

Inside Width

8.000 inches nominal

Material

steel overall

Mounting Feet Length

0.080 inches nominal

Mounting Feet Thickness

0.062 inches nominal

Overall Height

9.500 inches nominal

Overall Length

9.500 inches nominal

Overall Width

8.940 inches nominal

Second Center To Center Distance Between Mounting Holes

6.000 inches nominal

Special Features

designed for use as electrical junction boxes,terminial wiring boxes,and instrument housings.hinged door provide convenient access.boxes provide pro tection from dust,dirt,oil and water.construction is of 14 gage steel with seams continuously welded and ground smooth,no holes or knockouts.continuous hinge.external screw clamps are quick and easy to operate.bonding provision on door.external wall mounting brackets.oil-resistant gasket and adhesive.weldnuts provided for mounting optional panels and terminal block kits in size 6.00 x 4.00 (152 x 102mm) and larger.ansi 61 gray polester powder paint inside and out over phosphatized surfaces.optional panels are white.industry standardsul 50,file no. e27567:type 12, and type 13.ul 508a,508,file no. e61997: type 12 and 13. nema/eemac type 12 and 13.jic standard egp-1-1967(14 ga only).csa,file no.ll42184,type 12.iec60529,ip65.

Surface Treatment

paint overall

Third Center To Center Distance Between Mounting Holes

6.000 inches nominal

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0006219

Cross Reference

CAGE Codes

00843

Hoffman Engineering Co Div of Federal Cartridge Corp

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35205

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

063160

Schedule B & Trade

Schedule B

8536-90-8030

Description

electrical junction boxes, for a voltage not exceeding 1,000 v

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77259

(NAICS) North American Industrial Classification System

335932

Questions & Answers

1. What is the FSCG of the NSN 5975-01-416-0682?

   The FSCG of the NSN 5975-01-416-0682 is 5975

2. Does the NSN 5975-01-416-0682 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536908030

3. Does NSN 5975-01-416-0682 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5975-01-416-0682 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5975-01-416-0682 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5975-01-416-0682 was assigned to the Federal Catalog?

   It was assigned 31 years ago, on Wed, Jul 12, 1995