NSN A88008

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

"barrier infection control hndpc disp-shield 3.5"x3"x6.75" 500s" part name assigned by controlling agency, disposable-shield; clear plastic; 3.5 in. x 3 in. x 6.75 in; disposable; for t-bar type light handle handpiece; protects dentist and patient from cross contamination; dispenser packaging; unit qty 500 general characteristics item description.

NSN 6520-01-367-5230 Datasheet

(NSN) National Stock Number

6520-01-367-5230

(FSG) Federal Supply Group

65 - Medical, Dental, and Veterinary Equipment and Supplies

(FSC) Federal Supply Classification

6520 - Supplies, Equipment and Dental Instruments

(NIIN) National Item Identification Number

01-367-5230

Requires Demilitarization

Yes

(INC) Item Name Code

77777

Date

Sat, Nov 14, 1992

General Characteristics Item Description

disposable-shield; clear plastic; 3.5 in. x 3 in. x 6.75 in; disposable; for t-bar type light handle handpiece; protects dentist and patient from cross contamination; dispenser packaging; unit qty 500

Part Name Assigned By Controlling Agency

"barrier infection control hndpc disp-shield 3.5"x3"x6.75" 500s"

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

1742867

Cross Reference

CAGE Codes

0NUS8

Henry Schein, Inc. Div Usdg Federal Division

Non-manufacturers

5XLW0

Patterson Dental

Non-manufacturers

02QR5

Dental Health Products Incorporated Dba Dental Health Products Inc

Non-manufacturers

16969

Dentsply Sirona Inc Div Dentsply Prosthetics Division (aka Trubyte)

U.s./canadian manufacturers

2J095

Dentsply Intl Inc Ash/dentsply Div

Non-manufacturers

Freight Information

Air Commodity

MZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

00000

Water Commodity

650 - Instruments, dental

National Motor Freight Classification Item Number

056590

Questions & Answers

1. What is the FSCG of the NSN 6520-01-367-5230?

   The FSCG of the NSN 6520-01-367-5230 is 6520

2. Does NSN 6520-01-367-5230 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 6520-01-367-5230 contain precious materials?

   Item does not contain precious metal.

4. Does NSN 6520-01-367-5230 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 6520-01-367-5230 was assigned to the Federal Catalog?

   It was assigned 33 years ago, on Sat, Nov 14, 1992