NSN AA13A

A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see axle(1), shouldered. For items not having any of the above conditions see pin, shoulder, headless. Excludes:shaft(1), straight; and axle(1), straight.

1 coil quantity, air arc quenching method, unable to decode center to center distance between mounting facilities parallel to the altitude of an isosceles triangle, 79.100 cubic inches cubic measure, unable to decode center to center distance between mounting facilities parallel to width.

NSN 5945-01-261-1459 Datasheet

(NSN) National Stock Number

5945-01-261-1459

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5945 - Relays and Solenoids

(NIIN) National Item Identification Number

01-261-1459

Requires Demilitarization

Yes

(INC) Item Name Code

32512

Date

Sun, Aug 9, 1987

Schedule B Code

8536490075

Arc Quenching Method

air

Center To Center Distance Between Mounting Facilities Parallel To Width

unable to decode

Center To Center Distance Between Mounting Facilities Parallel To The Altitude Of An Isosceles Triangle

unable to decode

Coil Quantity

1

Cubic Measure

79.100 cubic inches

Duty Type

continuous

Fragility Factor

moderately rugged

Main Contact Load Current Rating At Maximum Rated Voltage

unable to decode

Main Contact Maximum Voltage Rating In Volts

600.0 ac

Material

plastic case

Mounting Facility Pattern

unable to decode

Mounting Facility Type And Quantity

2 slotted hole single mounting facility

Mounting Slot Width

unable to decode

Nonpile-Up Main Contact Arrangement

1 pole, double throw, one position momentary

Operating Voltage Rating And Type At Specified Temp

unable to decode

Overall Height

5.281 inches maximum

Overall Length

4.438 inches maximum

Overall Width

3.375 inches maximum

Purpose For Which Designed

general

Storage Type

general purpose warehouse

Terminal Type And Quantity

unable to decode

Winding Quantity

1

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Pseudo Item Name Code

0032512

Cross Reference

CAGE Codes

89946

Eaton Corporation Dba Eaton Inoac

Non-manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Less than Carload Rating

P - 77.5

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8536-49-0075

Description

relays, electromechanical, for a voltage exceeding 60 v but not exceeding 1,000 v, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77254

(NAICS) North American Industrial Classification System

335314

Questions & Answers

1. What is the FSCG of the NSN 5945-01-261-1459?

   The FSCG of the NSN 5945-01-261-1459 is 5945

2. Does the NSN 5945-01-261-1459 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536490075

3. Does NSN 5945-01-261-1459 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5945-01-261-1459 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5945-01-261-1459 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

6. When the NSN 5945-01-261-1459 was assigned to the Federal Catalog?

   It was assigned 39 years ago, on Sun, Aug 9, 1987