NSN AA50563-104ATTAA

A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.

0.500 inches all entrance conduit trade size accommodated, hub drilled and tapped all entrance conduit entrance type, line cover mounting hole arrangement style, solid center cover mounting gasket type, rigid metallic thickwall all entrance conduit type accommodated.

NSN 5975-00-933-0104 Datasheet

(NSN) National Stock Number

5975-00-933-0104

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5975 - Electrical Hardware and Supplies

(NIIN) National Item Identification Number

00-933-0104

Requires Demilitarization

Yes

(INC) Item Name Code

06945

Date

Wed, May 8, 1968

Schedule B Code

8543909000

Conduit Entrance Type

hub drilled and tapped all entrance

Conduit Trade Size Accommodated

0.500 inches all entrance

Conduit Type Accommodated

rigid metallic thickwall all entrance

Cover Mounting Gasket Type

solid center

Cover Mounting Hole Arrangement Style

line

Cover Mounting Method

threaded fastener w/wedgenut

Cover Mounting Surface Type

flat

Cover Mounting Hole Quantity

2

Cover Opening Length

3.312 inches nominal

Cover Opening Width

1.188 inches nominal

Cover Quantity

1

Functional Cover Style

blank

Hazardous Locations/Environmental Protection

dusttight-nema type 5 and explosion proof

Material

aluminum overall

Nondefinitive Spec/Std Data

4 design and t style and 1/2 inch size and 1 type

Overall Depth

1.750 inches nominal

Overall Length

5.688 inches nominal

Overall Width

1.375 inches nominal

Style Designator

oblong

Trade Designation

t series,mark 9

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0006945

Cross Reference

CAGE Codes

58536

Federal Commercial Item Description Promulgated by General Services Administration Washington Dc

Military standards and standards organizations (ex:stanags,milspecs,defstans)

13873

Dla Aviation Engineering Div Department of Defense

Government departments or units, including military organizations

03743

Egs Electrical Group Appleton Div

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35205

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

063160

Schedule B & Trade

Schedule B

8543-90-9000

Description

electrical machines and apparatus parts, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77879

(NAICS) North American Industrial Classification System

335999

Questions & Answers

1. What is the FSCG of the NSN 5975-00-933-0104?

   The FSCG of the NSN 5975-00-933-0104 is 5975

2. Does the NSN 5975-00-933-0104 have a Schedule B code assigned?

   Yes, the Schedule B code is 8543909000

3. Does NSN 5975-00-933-0104 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5975-00-933-0104 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5975-00-933-0104 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5975-00-933-0104 was assigned to the Federal Catalog?

   It was assigned 58 years ago, on Wed, May 8, 1968