NSN AM2-D3-A-100-2

A nut, flat on top and bottom having 6 flat sides. For items which have internal tapered or straight (parallel) pipe threads, specific electrical conduit size designation, and which when installed, provide a method of tightening to lock the connection, see locknut, electrical conduit. See also locknut, tube fitting. For items having a thickness (or height) exceeding two times the width across the flats, use post, electrical-mechanical equipment. (when height or thickness and/or width across the flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)

at each pole actuator position designation, multipole-multiple actuator type body style, 2.480 inches minimum and 2.520 inches maximum body length, magnetic blowout arc quenching method, trip-reset actuator function.

NSN 5925-01-285-0397 Datasheet

(NSN) National Stock Number

5925-01-285-0397

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5925 - Circuit Breakers

(NIIN) National Item Identification Number

01-285-0397

Requires Demilitarization

Yes

(INC) Item Name Code

00136

Date

Sun, Sep 4, 1988

Schedule B Code

8536200040

Actuator Function

trip-reset

Actuator Position Designation

at each pole

Arc Quenching Method

magnetic blowout

Body Length

2.480 inches minimum and 2.520 inches maximum

Body Style

multipole-multiple actuator type

Body Width

1.480 inches minimum and 1.520 inches maximum

Boss Height

0.120 inches minimum and 0.160 inches maximum

Center To Center Distance Between Terminals Parallel To Length

1.918 inches minimum and 1.958 inches maximum

Center To Center Distance Between Terminals Parallel To Width

0.730 inches minimum and 0.770 inches maximum

Circuit Protection Type

overcurrent all locations

Distance Between Centerlines Of Mounting Facilities Parallel To Body Width

0.730 inches minimum and 0.770 inches maximum

Distance Between Centerlines Of Mounting Facilities Parallel To Body Length

2.042 inches minimum and 2.082 inches maximum

External Actuator Linkage Arrangement

one and two linked

Fragility Factor

moderately rugged

Frequency In Hertz

60.0 all locations

Inclosure Protection Type For Which Designed

fungus resistant and humidity resistant and moisture resistant and shock resistant and vibration resistant

Internal Trip Release Configuration

series trip all locations

Main Contact Tripping Mechanism Type

trip free

Manual Actuator Type And Quantity

2 toggle

Material

plastic case

Maximum Continuous Load Current Rating Per Pole

100.0 amperes ac and 100.0 amperes dc all locations

Maximum Interrupting Capacity Current Type And Rating Per Pole In Amps

1000.0 ac and 5000.0 dc all locations

Mounting Facility Type And Quantity

4 threaded hole(s)

Mounting Surface To Terminal End Distance

2.441 inches minimum and 2.521 inches maximum

Nominal Thread Size

0.138 inches

Operating Voltage Type And Rating Per Pole In Volts

250.0 ac and 65.0 dc all locations

Pole Quantity

2

Reset Method

manual

Storage Type

general purpose warehouse

Terminal Type And Quantity

4 threaded stud

Thread Quantity Per Inch

32

Thread Series Designator

unified national coarse (unc)

Trip Release Characteristic

time delay all locations

Trip Release Method

magnetic-hydraulic all locations

Trip Delay Time In Seconds Per Rated Continuous Current

2.000 minimum at 200 pct and 18.000 maximum at 200 pct all locations

Ultimate Trip Rating Of Continuous Current Rating Per Pole In Percent

125.0 all locations

Unpackaged Unit Weight

6.500 ounces nominal

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000136

Cross Reference

CAGE Codes

74193

Eaton Corp Heinemann Products Commercial Controls Div

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35205

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

063160

Schedule B & Trade

Schedule B

8536-20-0040

Description

automatic circuit breakers, for a voltage not exceeding 1,000 v, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77252

(NAICS) North American Industrial Classification System

335313

Questions & Answers

1. What is the FSCG of the NSN 5925-01-285-0397?

   The FSCG of the NSN 5925-01-285-0397 is 5925

2. Does the NSN 5925-01-285-0397 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536200040

3. Does NSN 5925-01-285-0397 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5925-01-285-0397 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5925-01-285-0397 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5925-01-285-0397 was assigned to the Federal Catalog?

   It was assigned 38 years ago, on Sun, Sep 4, 1988