NSN AM9112DMB

A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see axle(1), shouldered. For items not having any of the above conditions see pin, shoulder, headless. Excludes:shaft(1), straight; and axle(1), straight.

d-2 mil-m-38510 case outline source and designator, 0.220 inches minimum and 0.310 inches maximum body width, 0.840 inches maximum body length, 0.140 inches minimum and 0.185 inches maximum body height, feat criticality code justification.

NSN 5962-01-321-1951 Datasheet

(NSN) National Stock Number

5962-01-321-1951

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5962 - Electronic Microcircuits

(NIIN) National Item Identification Number

01-321-1951

Requires Demilitarization

Yes

(INC) Item Name Code

41015

Date

Wed, Jun 13, 1990

Schedule B Code

8542900000

Body Height

0.140 inches minimum and 0.185 inches maximum

Body Length

0.840 inches maximum

Body Width

0.220 inches minimum and 0.310 inches maximum

Case Outline Source And Designator

d-2 mil-m-38510

Criticality Code Justification

feat

End Item Identification

wsd: arleigh burke class ddg; ticonderoga class cg (47); tarawa class lha; close in weapon system (ciws-phalanx); emory s. land class as; nimitz class cvn; forrestal class cv; 2m/ate microminiature automatic test equipment

Features Provided

hermetically sealed and burn in and w/enable and monolithic

Inclosure Configuration

dual-in-line

Inclosure Material

ceramic

Input Circuit Pattern

14 input

Maximum Power Dissipation Rating

1.0 watts

Memory Device Type

ram

Memory Capacity

unknown

Operating Temp Range

-55.0 to 125.0 celsius

Output Logic Form

n-type metal oxide-semiconductor logic

Special Features

weapon system essential

Storage Temp Range

-65.0 to 150.0 celsius

Terminal Surface Treatment

solder

Terminal Type And Quantity

16 printed circuit

Test Data Document

96906-mil-std-883 standard (includes industry or association standards, individual manufactureer standards, etc.).

Time Rating Per Chacteristic

300.00 nanoseconds maximum propagation delay time, low to high level output and 300.00 nanoseconds maximum propagation delay time, high to low level output

Voltage Rating And Type Per Characteristic

-0.5 volts minimum power source and 7.0 volts maximum power source

Identification

Demilitarization Code

Q - "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Pseudo Item Name Code

0041015

Cross Reference

CAGE Codes

53711

Naval Sea Systems Command

U.s./canadian manufacturers

34335

Advanced Micro Devices Inc Dba Amd Austin

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

3 - Electrostatic sensitive device (esd)

Uniform Freight Classification Item Number

34580

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061045

Schedule B & Trade

Schedule B

8542-90-0000

Description

electronic integrated circuits and microassembly parts

End Use

21320 - Semiconductors

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77689

(NAICS) North American Industrial Classification System

334413

Questions & Answers

1. What is the FSCG of the NSN 5962-01-321-1951?

   The FSCG of the NSN 5962-01-321-1951 is 5962

2. Does the NSN 5962-01-321-1951 have a Schedule B code assigned?

   Yes, the Schedule B code is 8542900000

3. Does NSN 5962-01-321-1951 require demilitarization?

   "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"

4. Does NSN 5962-01-321-1951 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5962-01-321-1951 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

6. When the NSN 5962-01-321-1951 was assigned to the Federal Catalog?

   It was assigned 36 years ago, on Wed, Jun 13, 1990