NSN AML22CBJ2CD

A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

panel mount body style, 1.400 inches nominal body height, 0.745 inches maximum body length, 2.000 amperes resistive dc and 2.000 amperes resistive ac contact load current rating at maximum rated voltage, 0.745 inches maximum body width.

NSN 5930-01-312-0574 Datasheet

(NSN) National Stock Number

5930-01-312-0574

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

01-312-0574

Requires Demilitarization

Yes

(INC) Item Name Code

00406

Date

Sat, Dec 9, 1989

Schedule B Code

8536509035

Body Height

1.400 inches nominal

Body Length

0.745 inches maximum

Body Style

panel mount

Body Width

0.745 inches maximum

Contact Load Current Rating At Maximum Rated Voltage

2.000 amperes resistive dc and 2.000 amperes resistive ac

Inclosure Type

fully inclosed

Maximum Voltage Rating In Volts

250.0 ac and 24.0 dc

Mounting Method

threaded bushing

Nonpile-Up Contact Arrangement

unable to decode

Overall Length

0.800 inches nominal

Overall Width

0.800 inches nominal

Precious Material And Location

contacts silver

Special Features

less actuator button; yellow light emitting diode for illumination

Terminal Type And Quantity

14 quick disconnect, male or 14 tab, solder lug

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

S - Item contains silver.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000406

Cross Reference

CAGE Codes

91929

Honeywell International Inc. Dba Honeyweel Sensing & Controls

U.s./canadian manufacturers

56996

Department of the Army Hq United States Army Communications Research and Development Command

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8536-50-9035

Description

switches, push-button, rated at over 5 a, for a voltage not exceeding 1,000 v

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77255

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5930-01-312-0574?

   The FSCG of the NSN 5930-01-312-0574 is 5930

2. Does the NSN 5930-01-312-0574 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536509035

3. Does NSN 5930-01-312-0574 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-01-312-0574 contain precious materials?

   Item contains silver.

5. Does NSN 5930-01-312-0574 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-01-312-0574 was assigned to the Federal Catalog?

   It was assigned 36 years ago, on Sat, Dec 9, 1989