NSN AP101-31F

A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

plastic case insulation material, 0.220 microfarads single section capacitance value per section, w/o mtg facilities, axial terminals body style, 1.187 inches nominal body length, 0.565 inches nominal body diameter.

NSN 5910-00-902-6871 Datasheet

(NSN) National Stock Number

5910-00-902-6871

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5910 - Capacitors

(NIIN) National Item Identification Number

00-902-6871

Requires Demilitarization

Yes

(INC) Item Name Code

00006

Date

Fri, Jan 1, 1960

Schedule B Code

8532250080

Body Diameter

0.565 inches nominal

Body Length

1.187 inches nominal

Body Style

w/o mtg facilities, axial terminals

Capacitance Value Per Section

0.220 microfarads single section

Case Insulation Material

plastic

Dissipation Factor At Reference Temp In Percent

0.1500

Dielectric Material

plastic polycarbonate

Features Provided

hermetically sealed case

Internal Electrical Connection Type

extended foil

Insulation Resistance At Maximum Operating Temp

40000.0 megohms

Insulation Resistance At Reference Temp

100000.0 megohms

Nonderated Operating Temp

-55.0 celsius minimum and 125.0 celsius maximum

Nonderated Continuous Voltage Rating And Type Per Section

100.0 dc single section

Reliability Indicator

not established

Schematic Diagram Designator

no common or grounded electrode(s)

Terminal Diameter

0.032 inches nominal

Terminal Length

1.620 inches minimum

Terminal Surface Treatment

solder

Terminal Type And Quantity

2 uninsulated wire lead

Tolerance Range Per Section

-1.00 to 1.00 percent single section

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Source of Supply Code

S9E - Defense supply center columbus, columbus, oh 43218

Pseudo Item Name Code

0000006

Cross Reference

CAGE Codes

97942

Northrop Grumman Systems Corporation Dba Northrop Grumman Systems Corp Div Northrop Grumman Systems Corporation Electronic Systems

U.s./canadian manufacturers

56289

Sprague Electric Co World Hqs

U.s./canadian manufacturers

96733

Sfe Technologies

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34450

Water Commodity

723 - Radio parts and equipment, excluding tubes packed separately

National Motor Freight Classification Item Number

061400

Schedule B & Trade

Schedule B

8532-25-0080

Description

fixed capacitors, dielectric of paper or plastic, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77866

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5910-00-902-6871?

   The FSCG of the NSN 5910-00-902-6871 is 5910

2. Does the NSN 5910-00-902-6871 have a Schedule B code assigned?

   Yes, the Schedule B code is 8532250080

3. Does NSN 5910-00-902-6871 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5910-00-902-6871 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5910-00-902-6871 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5910-00-902-6871 was assigned to the Federal Catalog?

   It was assigned 66 years ago, on Fri, Jan 1, 1960