NSN AP14-2P-CB

A tubular shaped unthreaded item with or without a flange at one end designed to be inserted into a hole to reduce the inside diameter of the hole and to protect the surrounding body structure from damage resulting from stress, strain, and/or vibration. The overall length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body. Includes items which are divided into two or more segments which includes 180 degrees (3.141 radians) or less of the bearing periphery. For items made of rubber, see bushing, nonmetallic. See also bearing, sleeve; bushing, tapered; spacer, sleeve; insulator, bushing; and bushing, electrical conductor. Excludes:bushing, drill, jig.

air arc quenching method, 1.500 inches maximum body length, trip-reset actuator function, multipole-single actuator type body style, between pole one and two actuator position designation.

NSN 5925-01-196-1055 Datasheet

(NSN) National Stock Number

5925-01-196-1055

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5925 - Circuit Breakers

(NIIN) National Item Identification Number

01-196-1055

Requires Demilitarization

Yes

(INC) Item Name Code

00136

Date

Fri, Dec 7, 1984

Schedule B Code

8536200040

Actuator Function

trip-reset

Actuator Position Designation

between pole one and two

Arc Quenching Method

air

Body Length

1.500 inches maximum

Body Style

multipole-single actuator type

Body Width

1.250 inches maximum

Bushing Length

0.380 inches maximum

Center To Center Distance Between Terminals Parallel To Width

0.375 inches nominal

Circuit Protection Type

overcurrent all locations

Fragility Factor

moderately rugged

Frequency In Hertz

60.0 all locations

Inclosure Protection Type For Which Designed

general purpose

Internal Trip Release Configuration

relay trip second location

Internal Trip Release Configuration

series trip first location

Main Contact Tripping Mechanism Type

trip free

Manual Actuator Type And Quantity

1 toggle

Maximum Continuous Load Current Rating Per Pole

5.0 amperes ac all locations

Maximum Interrupting Capacity Current Type And Rating Per Pole In Amps

1000.0 ac all locations

Mounting Facility Type And Quantity

1 threaded bushing with panel seal

Mounting Surface To Terminal End Distance

1.780 inches maximum

Nominal Thread Size

0.375 inches

Operating Voltage Type And Rating Per Pole In Volts

115.0 ac all locations

Pole Quantity

2

Reset Method

manual

Storage Type

general purpose warehouse

Special Features

two 6-32 threaded holes; for added mounting stability

Thread Quantity Per Inch

32

Thread Series Designator

unef

Trip Release Characteristic

time delay all locations

Trip Release Method

magnetic all locations

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000136

Cross Reference

CAGE Codes

96762

Electronic Research Associates Inc Transpac Power Supply Div

U.s./canadian manufacturers

81541

Sensata Technologies Maryland, Inc

Non-manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35205

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

063160

Schedule B & Trade

Schedule B

8536-20-0040

Description

automatic circuit breakers, for a voltage not exceeding 1,000 v, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77252

(NAICS) North American Industrial Classification System

335313

Questions & Answers

1. What is the FSCG of the NSN 5925-01-196-1055?

   The FSCG of the NSN 5925-01-196-1055 is 5925

2. Does the NSN 5925-01-196-1055 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536200040

3. Does NSN 5925-01-196-1055 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5925-01-196-1055 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5925-01-196-1055 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5925-01-196-1055 was assigned to the Federal Catalog?

   It was assigned 41 years ago, on Fri, Dec 7, 1984