NSN AP2-20V

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

2 threaded stud circuit attachment method and quantity, 1.880 inches nominal center to center distance between mounting facilities parallel to length, unable to decode accuracy in percent, white single indicator single range background color, 1.880 inches nominal center to center distance between mounting facilities parallel to width.

NSN 6625-00-275-6786 Datasheet

(NSN) National Stock Number

6625-00-275-6786

(FSG) Federal Supply Group

66 - Instruments and Laboratory Equipment

(FSC) Federal Supply Classification

6625 - Electrical and Electronic Properties Measuring and Testing Instruments

(NIIN) National Item Identification Number

00-275-6786

Requires Demilitarization

Yes

(INC) Item Name Code

16449

Date

Sat, Aug 4, 1973

Schedule B Code

9030908030

Accuracy In Percent

unable to decode

Background Color

white single indicator single range

Center To Center Distance Between Mounting Facilities Parallel To Length

1.880 inches nominal

Center To Center Distance Between Mounting Facilities Parallel To Width

1.880 inches nominal

Circuit Attachment Method And Quantity

2 threaded stud

Circuit Current For Which Designed

dc

Dial Scale Marking Color

unable to decode

Environmental Protection

dust tight

Features Provided

knife edge pointer and magnetic shield and zero adjuster

Fsc Application Data

test set,elect. equip.

Indicator Type

dial w/pointer

Installation Design

panel

Material

plastic acrylic

Measurement Range

unable to decode

Meter Body Diameter Behind Mounting Flange

2.220 inches nominal

Meter Depth Behind Mounting Flange

1.468 inches nominal

Mounting Arrangement Style

four hole/stud rectangular/square

Mounting Facility Type And Quantity

4 threaded stud(s)

Movement Suspension Method

jewel pivot base

Movement Type

moving coil, permanent magnet

Mounting Stud Diameter

0.112 inches nominal

Mounting Stud Length

0.437 inches nominal

Nuclear Hardness Critical Feature

nonhardened

Overall Height

2.562 inches nominal

Overall Length

1.905 inches nominal

Overall Width

2.812 inches nominal

Pointer Color

unable to decode

Power Source

external

Scale Division Quantity

unable to decode

Scale Graduation Type

unable to decode

Scale Selection Method

terminal

Special Features

ruggedized

Style Designator

rectangular flush mtg

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0016449

Cross Reference

CAGE Codes

19068

Ammon Instruments Corp Div of Wheelabrator-Frye Inc

U.s./canadian manufacturers

Freight Information

Air Commodity

VZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

J - 100.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34540

Water Commodity

657 - Instruments, electric meter

National Motor Freight Classification Item Number

061620

Schedule B & Trade

Schedule B

9030-90-8030

Description

parts and accessories of articles of schedule b subheading 9030.39

End Use

21160 - Measuring, testing, control instruments

Unit of Quantity

KG

USDA

Yes

(SITC) Standard International Trade Classification

87479

(NAICS) North American Industrial Classification System

334515

Questions & Answers

1. What is the FSCG of the NSN 6625-00-275-6786?

   The FSCG of the NSN 6625-00-275-6786 is 6625

2. Does the NSN 6625-00-275-6786 have a Schedule B code assigned?

   Yes, the Schedule B code is 9030908030

3. Does NSN 6625-00-275-6786 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 6625-00-275-6786 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 6625-00-275-6786 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 6625-00-275-6786 was assigned to the Federal Catalog?

   It was assigned 53 years ago, on Sat, Aug 4, 1973