NSN AP27401

An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.

dry application type, riveted attachment method, brake,segmented rotor,aircraft fsc application data, 7.434 inches nominal arc length, rigid friction lining features provided.

NSN 1630-00-528-1367 Datasheet

(NSN) National Stock Number

1630-00-528-1367

(FSG) Federal Supply Group

16 - Aerospace Craft Components and Accessories

(FSC) Federal Supply Classification

1630 - Aircraft Wheel and Brake Systems

(NIIN) National Item Identification Number

00-528-1367

Requires Demilitarization

Yes

(INC) Item Name Code

11405

Date

Tue, Jan 1, 1963

Schedule B Code

8803200060

Application Type

dry

Arc Length

7.434 inches nominal

Attachment Method

riveted

Features Provided

rigid friction lining

Fsc Application Data

brake,segmented rotor,aircraft

Hole Arrangement Style

indefinite

Hole Type And Quantity

5 countersunk

Lining Style

clutch disk segment

Material

iron rust resisting friction lining

Minor Radius

3.688 inches nominal

Surface Condition And Location

both sides ground

Thickness

0.105 inches minimum and 0.110 inches maximum

Width

1.125 inches nominal

Identification

Demilitarization Code

Q - "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0011405

Cross Reference

CAGE Codes

33269

Aircraft Wheel and Brake, Llc Dba Cleveland Wheel and Brake Systems

U.s./canadian manufacturers

03533

Crane Carrier Company, Llc

U.s./canadian manufacturers

23233

Jay-Em Aerospace Corporation

U.s./canadian manufacturers

23509

Western Precision Inc. Div Utah Tool & Die

U.s./canadian manufacturers

73808

Continental Tire the Americas, Llc Dba Continental Tires

U.s./canadian manufacturers

Freight Information

Air Commodity

AZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

Q - 70.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

08480

Water Commodity

671 - Aircraft parts, to include test/tool sets and equipment (other than armament systems)

National Motor Freight Classification Item Number

018400

Questions & Answers

1. What is the FSCG of the NSN 1630-00-528-1367?

   The FSCG of the NSN 1630-00-528-1367 is 1630

2. Does the NSN 1630-00-528-1367 have a Schedule B code assigned?

   Yes, the Schedule B code is 8803200060

3. Does NSN 1630-00-528-1367 require demilitarization?

   "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"

4. Does NSN 1630-00-528-1367 contain precious materials?

   Precious metal content is unknown

5. Does NSN 1630-00-528-1367 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 1630-00-528-1367 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963