NSN APCB25

A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

1 shaft adjustment device drive type and quantity, 180.0 degrees nominal clockwise and 180.0 degrees nominal counterclockwise adjustment device rotation, 0.891 inches nominal body length, unable to decode capacitance range in picofarads, plate-meshing body style.

NSN 5910-00-192-2363 Datasheet

(NSN) National Stock Number

5910-00-192-2363

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5910 - Capacitors

(NIIN) National Item Identification Number

00-192-2363

Requires Demilitarization

Yes

(INC) Item Name Code

00531

Date

Tue, Jan 1, 1963

Schedule B Code

8532290040

Adjustment Device Drive Type And Quantity

1 shaft

Adjustment Device Rotation

180.0 degrees nominal clockwise and 180.0 degrees nominal counterclockwise

Body Length

0.891 inches nominal

Body Style

plate-meshing

Capacitance Range In Picofarads

unable to decode

Distance Between Centerlines Of Mounting Facilities Parallel To Body Width

0.656 inches nominal

Inclosure Type

uninclosed

Mounting Facility Screw Thread Series Designator

unified national coarse (unc)

Mounting Facility Type And Quantity

2 threaded hole(s)

Nominal Thread Size

0.112 inches

Nonderated Voltage Rating And Type

unable to decode

Overall Height

1.219 inches nominal

Overall Length

1.157 inches nominal

Overall Width

0.938 inches nominal

Shaft Diameter

unable to decode

Shaft Length

unable to decode

Shaft Type

unable to decode

Terminal Type And Quantity

1 tab, solder lug and 2 solder stud

Tuning Characteristic

unable to decode

Unthreaded Mounting Hole Diameter

0.112 inches nominal

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Source of Supply Code

S9E - Defense supply center columbus, columbus, oh 43218

Pseudo Item Name Code

0000531

Cross Reference

CAGE Codes

88113

Hbc Solutions, Inc. Dba Harris Broadcast

U.s./canadian manufacturers

56394

Pax Mfg Corp Hammarlund Mfg Co Div

U.s./canadian manufacturers

06840

Bendix Corp the

U.s./canadian manufacturers

06845

Raytheon Company Dba Raytheon Co

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Less than Carload Rating

P - 77.5

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34450

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061400

Schedule B & Trade

Schedule B

8532-29-0040

Description

fixed capacitors, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77867

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5910-00-192-2363?

   The FSCG of the NSN 5910-00-192-2363 is 5910

2. Does the NSN 5910-00-192-2363 have a Schedule B code assigned?

   Yes, the Schedule B code is 8532290040

3. Does NSN 5910-00-192-2363 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5910-00-192-2363 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5910-00-192-2363 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5910-00-192-2363 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963