NSN APS28

A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of either a thin layer of conductive material, containing either binders or insulating materials, deposited on an insulated form; or an alloy of metal and ceramic materials, usually fused to an insulated form. Opposition to the flow of current is an inherent property of the materials used and is manifest by the heat dissipation in the resistor. See also attenuator, fixed and resistor, fixed, composition. Excludes:carbon composition type resistors.

3.562 inches nominal center to center distance between bolt holes along length, 0.125 inches nominal cross-sectional thickness, 2.250 inches nominal center to center distance between bolt holes along width, solid single or composition cross-sectional shape style, 6 bolt hole quantity.

NSN 5330-00-599-6100 Datasheet

(NSN) National Stock Number

5330-00-599-6100

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5330 - Packing and Gasket Materials

(NIIN) National Item Identification Number

00-599-6100

Requires Demilitarization

Yes

(INC) Item Name Code

04522

Date

Tue, Jan 1, 1963

Bolt Hole Quantity

6

Center To Center Distance Between Bolt Holes Along Length

3.562 inches nominal

Center To Center Distance Between Bolt Holes Along Width

2.250 inches nominal

Cross-Sectional Shape Style

solid single or composition

Cross-Sectional Thickness

0.125 inches nominal

Hole Diameter

0.344 inches nominal

Material

unable to decode

Outside Corner Radius

0.438 inches nominal

Outside Edge To Bolt Hole Center Distance Along Length

0.438 inches nominal

Outside Edge To Bolt Hole Center Distance Along Width

0.438 inches nominal

Overall Length

8.000 inches nominal

Overall Width

3.125 inches nominal

Style Designator

non-circular

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Source of Supply Code

S9I - Defense industrial supply center philadelphia, pennsylvania 19111

Pseudo Item Name Code

0004522

Cross Reference

CAGE Codes

31577

Jaeger Machine Co

U.s./canadian manufacturers

Freight Information

Air Commodity

VZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Less than Carload Rating

P - 77.5

National Motor Freight Class Rating

W - Rating variable

Rail Variation

1

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

95100

Water Commodity

713 - Metal hardware

National Motor Freight Classification Item Number

194120

Questions & Answers

1. What is the FSCG of the NSN 5330-00-599-6100?

   The FSCG of the NSN 5330-00-599-6100 is 5330

2. Does NSN 5330-00-599-6100 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 5330-00-599-6100 contain precious materials?

   Item does not contain precious metal.

4. Does NSN 5330-00-599-6100 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 5330-00-599-6100 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963