NSN B0032FFF2A3

A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use disk, solid, plain. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see shim. For items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. When thickness and/or outsidediameter or smallest overall outside dimension is designated as a tolerance /dimension the maximum dimension will be used to determine compliance. Excludes:gasket; insulator (as modified) and mounting pad, electrical-electronic component.

totally enclosed enclosure feature, connection type and voltage rating in volts, 182t frame size designation, nema inclosure specification, unable to decode frequency in hertz.

NSN 6105-01-311-7516 Datasheet

(NSN) National Stock Number

6105-01-311-7516

(FSG) Federal Supply Group

61 - Electric Wire, and Power and Distribution Equipment

(FSC) Federal Supply Classification

6105 - Electrical Motors

(NIIN) National Item Identification Number

01-311-7516

Requires Demilitarization

Yes

(INC) Item Name Code

00530

Date

Tue, Dec 5, 1989

Connection Type And Voltage Rating In Volts

Enclosure Feature

totally enclosed

Frame Size Designation

182t

Frequency In Hertz

unable to decode

Inclosure Specification

nema

Length Of Shaft From Housing

unable to decode

Phase

unable to decode

Mounting Facility Type And Quantity

4 unthreaded hole(s)

Nominal Center To Center Distance Between Mounting Facilities Parallel To Length

6.000 inches

Nominal Center To Center Distance Between Mounting Facilities Parallel To Width

8.625 inches

Overall Height

8.625 inches

Overall Length

14.125 inches

Rotor Speed Rating In Rpm

1145.0 single no load

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Pseudo Item Name Code

0000530

Cross Reference

CAGE Codes

61802

Toshiba International Corporation Dba Toshiba International Corp

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34760

Water Commodity

593 - Motors and parts, (machinery and parts),(less than 35 feet)

National Motor Freight Classification Item Number

062120

Questions & Answers

1. What is the FSCG of the NSN 6105-01-311-7516?

   The FSCG of the NSN 6105-01-311-7516 is 6105

2. Does NSN 6105-01-311-7516 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 6105-01-311-7516 contain precious materials?

   Item does not contain precious metal.

4. Does NSN 6105-01-311-7516 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

5. When the NSN 6105-01-311-7516 was assigned to the Federal Catalog?

   It was assigned 36 years ago, on Tue, Dec 5, 1989