NSN B1-C45323

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

an/tpn-19 end item identification, coaxial coupling connection method, 3 connector quantity, 50.0 nominal impedance rating in ohms, +7.1 to 8.4 gigahertz frequency range rating.

NSN 5985-01-290-9757 Datasheet

(NSN) National Stock Number

5985-01-290-9757

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5985 - Related Equipment, Waveguides and Antennas

(NIIN) National Item Identification Number

01-290-9757

Requires Demilitarization

Yes

(INC) Item Name Code

31842

Date

Wed, Dec 21, 1988

Schedule B Code

8529109000

End Item Identification

an/tpn-19

Connection Method

coaxial coupling

Connector Quantity

3

Frequency Range Rating

+7.1 to 8.4 gigahertz

Impedance Rating In Ohms

50.0 nominal

Insertion Loss In Decibels

0.4

Overall Height

1.250 inches nominal

Overall Length

1.480 inches nominal

Overall Width

0.860 inches nominal

Identification

Demilitarization Code

Q - "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0031842

Cross Reference

CAGE Codes

98749

Sacramento Air Logistics Center Sm-Alc/liil

U.s./canadian manufacturers

51027

Renaissance Electronics & Communications, Llc Dba Use Cage Code 0rj02 for Cataloging

U.s./canadian manufacturers

24022

Teledyne Defense Electronics, Llc Dba Teledyne Microwave Solutions

Non-manufacturers

23261

Ute Microwave, Inc

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

49770

Water Commodity

723 - Radio parts and equipment, excluding tubes packed separately

National Motor Freight Classification Item Number

063520

Schedule B & Trade

Schedule B

8529-10-9000

Description

antenna & antenna reflectors of all kinds; parts suitable for use soley or principally w/ apparatus of heading 8524 to 8528, nesoi

End Use

21400 - Telecommunications equipment

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

76493

(NAICS) North American Industrial Classification System

334220

Questions & Answers

1. What is the FSCG of the NSN 5985-01-290-9757?

   The FSCG of the NSN 5985-01-290-9757 is 5985

2. Does the NSN 5985-01-290-9757 have a Schedule B code assigned?

   Yes, the Schedule B code is 8529109000

3. Does NSN 5985-01-290-9757 require demilitarization?

   "commerce control list items (ccli) - mut to the point of scrap required outside the united states. Inside the united states, mut is required when the demil integrity code (ic) is "3" and mut is not required when the demic is "6" (note 8)"

4. Does NSN 5985-01-290-9757 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5985-01-290-9757 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5985-01-290-9757 was assigned to the Federal Catalog?

   It was assigned 37 years ago, on Wed, Dec 21, 1988