NSN B1G4224

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

0.220 microfarads single section capacitance value per section, 0.400 inches nominal body diameter, w/o mtg facilities, terminal(s) on one end body style, 0.140 inches nominal center to center distance between terminals parallel to diameter, 1.157 inches maximum body length.

NSN 5910-00-992-0771 Datasheet

(NSN) National Stock Number

5910-00-992-0771

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5910 - Capacitors

(NIIN) National Item Identification Number

00-992-0771

Requires Demilitarization

Yes

(INC) Item Name Code

31959

Date

Fri, Jan 1, 1960

Schedule B Code

8532290040

Body Diameter

0.400 inches nominal

Body Length

1.157 inches maximum

Body Style

w/o mtg facilities, terminal(s) on one end

Capacitance Value Per Section

0.220 microfarads single section

Center To Center Distance Between Terminals Parallel To Diameter

0.140 inches nominal

Features Provided

hermetically sealed case

Insulation Resistance At Reference Temp

500.0 megohm-microfarads

Nonderated Operating Temp

-55.0 celsius minimum and 100.0 celsius maximum

Nonderated Continuous Voltage Rating And Type Per Section

400.0 dc single section

Reliability Indicator

not established

Schematic Diagram Designator

no common or grounded electrode(s)

Terminal Diameter

0.032 inches nominal

Terminal Length

1.620 inches minimum

Terminal Surface Treatment

solder

Terminal Type And Quantity

2 uninsulated wire lead

Tolerance Range Per Section

-20.00 to 20.00 percent single section

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0031959

Cross Reference

CAGE Codes

10001

Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier

U.s./canadian manufacturers

0AM43

Lcr Electronics, Inc Div Lcr Electronics, Inc. Dba Astrodyne Tdi Emi Filters Bu

U.s./canadian manufacturers

36090

Lockheed Martin Librascope Corp

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34450

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061400

Schedule B & Trade

Schedule B

8532-29-0040

Description

fixed capacitors, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77867

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5910-00-992-0771?

   The FSCG of the NSN 5910-00-992-0771 is 5910

2. Does the NSN 5910-00-992-0771 have a Schedule B code assigned?

   Yes, the Schedule B code is 8532290040

3. Does NSN 5910-00-992-0771 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5910-00-992-0771 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5910-00-992-0771 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5910-00-992-0771 was assigned to the Federal Catalog?

   It was assigned 66 years ago, on Fri, Jan 1, 1960