NSN B2256

A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use disk, solid, plain. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see shim. For items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. When thickness and/or outsidediameter or smallest overall outside dimension is designated as a tolerance /dimension the maximum dimension will be used to determine compliance. Excludes:gasket; insulator (as modified) and mounting pad, electrical-electronic component.

6740-00-110-5445, roller assy idler.

NSN 6740-00-110-5445 Datasheet

(NSN) National Stock Number

6740-00-110-5445

(FSG) Federal Supply Group

67 - Photographic Equipment

(FSC) Federal Supply Classification

6740 - Photographic Developing and Finishing Equipment

(NIIN) National Item Identification Number

00-110-5445

Requires Demilitarization

Yes

(INC) Item Name Code

77777

Date

Fri, Aug 9, 1968

Schedule B Code

9010100000

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Source of Supply Code

S9G - Defense supply center richmond, virginia 23297

Pseudo Item Name Code

1303487

Cross Reference

CAGE Codes

02077

Miller-Holzwarth Inc.

U.s./canadian manufacturers

Freight Information

Schedule B & Trade

Schedule B

9010-10-0000

Description

apparatus & equipment, automatically developing photographic film/paper in rolls, automatically exposing developing film to roll of photographic paper

End Use

21190 - Photo, service industry machinery

Unit of Quantity

KG

USDA

Yes

(SITC) Standard International Trade Classification

88135

(NAICS) North American Industrial Classification System

333310

Questions & Answers

1. What is the FSCG of the NSN 6740-00-110-5445?

   The FSCG of the NSN 6740-00-110-5445 is 6740

2. Does the NSN 6740-00-110-5445 have a Schedule B code assigned?

   Yes, the Schedule B code is 9010100000

3. Does NSN 6740-00-110-5445 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 6740-00-110-5445 contain precious materials?

   Precious metal content is unknown

5. Does NSN 6740-00-110-5445 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 6740-00-110-5445 was assigned to the Federal Catalog?

   It was assigned 58 years ago, on Fri, Aug 9, 1968