NSN B29487ISSUEA

An item fabricated from nonmetallic special shaped section. It may be (1) formed to a specific shape with or without joints, (2) a single piece whose ends have been secured together to form a specific shape, or (3) a straight item fabricated to a specific length for a specific application with end cuts or joints. Items, except for molded corners, slot(s), press fit buttons, and the like must be of one continuous cross section. It is specifically designed for use in applications where there is no relative motion between joined parts. Excludes:bushing, nonmetallic; packing, performed; pad, cushioning;and seal, plain. For straight items with square end cuts and without mounting hole(s), slot(s), or press fit buttons, see nonmetallic special shaped section.

increase contact action stimulus, 0.575 inches minimum and 0.640 inches maximum body diameter, unable to decode contact load current rating, 0.315 inches nominal body height, actuation point not adjustable and deactuation point not adjustable contact adjustability.

NSN 5930-00-725-6807 Datasheet

(NSN) National Stock Number

5930-00-725-6807

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

00-725-6807

Requires Demilitarization

Yes

(INC) Item Name Code

00451

Date

Tue, Jan 1, 1963

Schedule B Code

9032100000

Body Diameter

0.575 inches minimum and 0.640 inches maximum

Body Height

0.315 inches nominal

Contact Action Stimulus

increase

Contact Adjustability

actuation point not adjustable and deactuation point not adjustable

Contact Load Current Rating

unable to decode

Contact Stimulus Rating

112.00 actuation point nominal degrees fahrenheit and 86.00 deactuation point nominal degrees fahrenheit

Contact Voltage Rating In Volts

unable to decode

Distance Between Mounting Facility Centers

0.805 inches minimum and 0.816 inches maximum

Features Provided

hermetically sealed case

Frequency In Hertz

unable to decode

Media For Which Designed

gas

Mounting Facility Pattern

two position in-line

Mounting Method

bracket(s) and unthreaded hole(s)

Nonpile-Up Contact Arrangement

1 pole, single throw, normally open, momentary action

Operating Temp Rating

-80.0 fahrenheit minimum and 550.0 fahrenheit maximum

Overall Height

0.607 inches nominal

Overall Length

1.076 inches minimum and 1.108 inches maximum

Style Designator

disc w/flange

Temp Sensing Element Type

internal sensor

Terminal Type

tab, solder lug

Unthreaded Mounting Hole Diameter

0.112 inches minimum and 0.114 inches maximum

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Source of Supply Code

S9E - Defense supply center columbus, columbus, oh 43218

Pseudo Item Name Code

0000451

Cross Reference

CAGE Codes

42498

Dar Electronics Inc Dba National Radio Co

U.s./canadian manufacturers

82647

Sensata Technologies, Inc. Div Sensata Attleboro

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

9032-10-0000

Description

thermostats

End Use

21160 - Measuring, testing, control instruments

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

87461

(NAICS) North American Industrial Classification System

334512

Questions & Answers

1. What is the FSCG of the NSN 5930-00-725-6807?

   The FSCG of the NSN 5930-00-725-6807 is 5930

2. Does the NSN 5930-00-725-6807 have a Schedule B code assigned?

   Yes, the Schedule B code is 9032100000

3. Does NSN 5930-00-725-6807 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-00-725-6807 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5930-00-725-6807 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-00-725-6807 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963