NSN B67281

A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.

2.250 inches nominal center to center distance between mounting facilities parallel to width, continuous attenuation variation method, 8500.000 kilohertz minimum and 10000.000 kilohertz maximum frequency range, waveguide application design, 2.250 inches nominal center to center distance between mounting facilities parallel to length.

NSN 5985-00-902-1494 Datasheet

(NSN) National Stock Number

5985-00-902-1494

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5985 - Related Equipment, Waveguides and Antennas

(NIIN) National Item Identification Number

00-902-1494

Requires Demilitarization

Yes

(INC) Item Name Code

00838

Date

Fri, Jan 1, 1960

Schedule B Code

8529109000

Application Design

waveguide

Attenuation Variation Method

continuous

Center To Center Distance Between Mounting Facilities Parallel To Length

2.250 inches nominal

Center To Center Distance Between Mounting Facilities Parallel To Width

2.250 inches nominal

Frequency Range

8500.000 kilohertz minimum and 10000.000 kilohertz maximum

Mounting Facility Pattern

four position rectangular

Mounting Facility Type And Quantity

4 unthreaded hole(s)

Overall Attenuation Range In Decibels

+0.0 to 10.0

Power Rating

2.2 watts peak

Terminal Type And Quantity

2 flange

Unthreaded Mounting Hole Diameter

0.152 inches nominal

Voltage Standing Wave Ratio

1.00 and 1.15

Identification

Demilitarization Code

B - Usml items - mutilation to the point of scrap required worldwide. (note 7).

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000838

Cross Reference

CAGE Codes

99696

Lockheed Martin Corporation Div Lockheed Martin Systems & Global Solutions

U.s./canadian manufacturers

96341

Cobham Advanced Electronic Solutions Inc.

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34580

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061700

Schedule B & Trade

Schedule B

8529-10-9000

Description

antenna & antenna reflectors of all kinds; parts suitable for use soley or principally w/ apparatus of heading 8524 to 8528, nesoi

End Use

21400 - Telecommunications equipment

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

76493

(NAICS) North American Industrial Classification System

334220

Questions & Answers

1. What is the FSCG of the NSN 5985-00-902-1494?

   The FSCG of the NSN 5985-00-902-1494 is 5985

2. Does the NSN 5985-00-902-1494 have a Schedule B code assigned?

   Yes, the Schedule B code is 8529109000

3. Does NSN 5985-00-902-1494 require demilitarization?

   Usml items - mutilation to the point of scrap required worldwide. (note 7).

4. Does NSN 5985-00-902-1494 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5985-00-902-1494 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5985-00-902-1494 was assigned to the Federal Catalog?

   It was assigned 66 years ago, on Fri, Jan 1, 1960