NSN B6809

A tubular shaped item with or without flange(s) designed to reduce friction and carry a kinetic load on the surface(s) parallel to the axis of the bore. It must have a visible or detectable means of lubrication or be self-lubricated. The over all length must exceed 25 percent of the outside diameter or the shortest distance between peripheral flats of the body, except for straight tubular (without flange or shoulder) items having a bearing surface(s) parallel to the axis of the bore only. Includes items which are divided into two or more segments which include 180 degrees (3.141 radians) or less of the bearing periphery. See also bushing, sleeve; spacer, sleeve; and washer (as modified). Excludes:pin, hollow.

yoke design type, 3.312 inches nominal distance from pivot hole center to rod connecting end, 1.375 inches nominal fork span width, axle assy,compressor unit,air,model mc1a fsc application data, 2.062 inches nominal fork depth.

NSN 2530-00-618-7655 Datasheet

(NSN) National Stock Number

2530-00-618-7655

(FSG) Federal Supply Group

25 - Vehicular Equipment Components

(FSC) Federal Supply Classification

2530 - Vehicular Brake, Steering, Axle, Wheel and Track Components

(NIIN) National Item Identification Number

00-618-7655

Requires Demilitarization

Yes

(INC) Item Name Code

15952

Date

Sun, Jan 1, 1961

Schedule B Code

8708295170

Design Type

yoke

Distance From Pivot Hole Center To Rod Connecting End

3.312 inches nominal

Fork Span Width

1.375 inches nominal

Fork Depth

2.062 inches nominal

Fsc Application Data

axle assy,compressor unit,air,model mc1a

Pivot Hole Diameter

0.562 inches nominal

Rod Connecting End Thread Direction

right-hand

Rod Connecting End Thread Length

1.250 inches nominal

Rod Connecting End Thread Location

internal

Rod Connecting End Thread Series Designator

unf

Rod Connecting End Thread Size

3/4-16

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0015952

Cross Reference

CAGE Codes

52793

Saginaw Products Corporation Dba Cignys

U.s./canadian manufacturers

Freight Information

Air Commodity

VZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

09100

Water Commodity

585 - Vehicles and auto supplies

National Motor Freight Classification Item Number

019670

Questions & Answers

1. What is the FSCG of the NSN 2530-00-618-7655?

   The FSCG of the NSN 2530-00-618-7655 is 2530

2. Does the NSN 2530-00-618-7655 have a Schedule B code assigned?

   Yes, the Schedule B code is 8708295170

3. Does NSN 2530-00-618-7655 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 2530-00-618-7655 contain precious materials?

   Precious metal content is unknown

5. Does NSN 2530-00-618-7655 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 2530-00-618-7655 was assigned to the Federal Catalog?

   It was assigned 65 years ago, on Sun, Jan 1, 1961