NSN B9318

A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see gearshaft (as modified). For items designed to support rotating members see axle(1), straight. For items not having the above conditions see pin, straight, headless. For items having machined ends which constitute steps see shaft(1), shouldered; axle(1), shouldered; and bolt, fluid passage.

item is used to add a top roller to a combination magazine;used on verssmat film processor;item consists of 2 brackets,a metal roller with bushing in each end;approx 11 in.w x.075 in.dia.;est.wt.8 oz general characteristics item description, mobile processing lab p/n ws430b end item identification.

NSN 6780-01-239-9007 Datasheet

(NSN) National Stock Number

6780-01-239-9007

(FSG) Federal Supply Group

67 - Photographic Equipment

(FSC) Federal Supply Classification

6780 - Outfits, Kits and Photographic Sets

(NIIN) National Item Identification Number

01-239-9007

Requires Demilitarization

Yes

(INC) Item Name Code

77777

Date

Fri, Sep 5, 1986

End Item Identification

mobile processing lab p/n ws430b

General Characteristics Item Description

item is used to add a top roller to a combination magazine;used on verssmat film processor;item consists of 2 brackets,a metal roller with bushing in each end;approx 11 in.w x.075 in.dia.;est.wt.8 oz

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

1303332

Cross Reference

CAGE Codes

02077

Miller-Holzwarth Inc.

U.s./canadian manufacturers

Freight Information

Air Commodity

PZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

49790

Water Commodity

713 - Metal hardware

National Motor Freight Classification Item Number

095190

Questions & Answers

1. What is the FSCG of the NSN 6780-01-239-9007?

   The FSCG of the NSN 6780-01-239-9007 is 6780

2. Does NSN 6780-01-239-9007 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 6780-01-239-9007 contain precious materials?

   Item does not contain precious metal.

4. Does NSN 6780-01-239-9007 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 6780-01-239-9007 was assigned to the Federal Catalog?

   It was assigned 40 years ago, on Fri, Sep 5, 1986