NSN BA2RV2

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

1.190 inches nominal actuator length, 1.656 inches nominal actuator free position height, 0.150 inches nominal actuator roller width, 0.370 inches nominal actuator roller diameter, roller arm actuator style.

NSN 5930-00-707-4138 Datasheet

(NSN) National Stock Number

5930-00-707-4138

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

00-707-4138

Requires Demilitarization

Yes

(INC) Item Name Code

00399

Date

Tue, Jan 1, 1963

Schedule B Code

8536509050

Actuator Length

1.190 inches nominal

Actuator Free Position Height

1.656 inches nominal

Actuator Roller Diameter

0.370 inches nominal

Actuator Roller Width

0.150 inches nominal

Actuator Style

roller arm

Actuator Movement

0.468 pretravel inches nominal and 1.188 overtravel inches nominal and 0.085 differential inches nominal

Body Height

1.185 inches nominal

Body Length

1.940 inches nominal

Body Style

hole mounted

Body Width

0.687 inches nominal

Center To Center Distance Between Mounting Facilities Parallel To Length

1.000 inches nominal

Contact Load Current Rating At Maximum Rated Voltage

250.000 milliamperes resistive dc and 20.000 amperes resistive ac

Inclosure Type

fully inclosed

Maximum Voltage Rating In Volts

480.0 ac and 250.0 dc

Mounting Method

unthreaded hole(s)

Nonpile-Up Contact Arrangement

unable to decode

Switch Release Force

0.5 ounces nominal

Switch Actuating Force

3.5 ounces nominal

Terminal Type And Quantity

3 screw

Unthreaded Mounting Hole Diameter

0.142 inches nominal

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000399

Cross Reference

CAGE Codes

91929

Honeywell International Inc. Dba Honeyweel Sensing & Controls

U.s./canadian manufacturers

92755

Northrop Grumman Systems Corp Dba Northrop Grumman Systems Corp Div Land & Self Protection Systems Div

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8536-50-9050

Description

switches, slide, for a voltage not exceeding 1,000 v

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77255

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5930-00-707-4138?

   The FSCG of the NSN 5930-00-707-4138 is 5930

2. Does the NSN 5930-00-707-4138 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536509050

3. Does NSN 5930-00-707-4138 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-00-707-4138 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5930-00-707-4138 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-00-707-4138 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963