NSN BACB30NF5D10

A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see axle(1), shouldered. For items not having any of the above conditions see pin, shoulder, headless. Excludes:shaft(1), straight; and axle(1), straight.

0.3110 inches minimum and 0.3120 inches maximum grip diameter, 0.615 inches minimum and 0.635 inches maximum grip length, 1.064 inches minimum and 1.094 inches maximum fastener length, 0.156 inches minimum and 0.171 inches maximum head height, distance from head largest bearing surface to shank hole center.

NSN 5306-01-049-4045 Datasheet

(NSN) National Stock Number

5306-01-049-4045

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5306 - Bolts

(NIIN) National Item Identification Number

01-049-4045

Requires Demilitarization

Yes

(INC) Item Name Code

27851

Date

Wed, Oct 19, 1977

Schedule B Code

7318152000

Distance From Head Largest Bearing Surface To Shank Hole Center

Fastener Length

1.064 inches minimum and 1.094 inches maximum

Grip Diameter

0.3110 inches minimum and 0.3120 inches maximum

Grip Length

0.615 inches minimum and 0.635 inches maximum

Head Height

0.156 inches minimum and 0.171 inches maximum

Head Style

undercut hexagon

Material

Minimum Tensile Strength

140000 pounds per square inch

Nominal Thread Diameter

0.312 inches

Shank Unthreaded Hole Diameter

Specification/Standard Data

81205-bacb30nf manufacturers standard

Surface Finish

unable to decode

Surface Treatment Document And Classification

unable to decode

Surface Treatment

Thread Class

3a

Thread Direction

right-hand

Thread Length

0.429 inches minimum and 0.479 inches maximum

Thread Quantity Per Inch

24

Thread Series Designator

unified national joint fine (unjf)

Width Between Flats

0.492 inches minimum and 0.502 inches maximum

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Source of Supply Code

S9I - Defense industrial supply center philadelphia, pennsylvania 19111

Pseudo Item Name Code

0027851

Cross Reference

CAGE Codes

81205

The Boeing Company Div Defense

U.s./canadian manufacturers

Freight Information

Air Commodity

BZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

48950

Water Commodity

573 - Bolts or nuts (iron or steel),(less than 35 feet)

National Motor Freight Classification Item Number

093486

Schedule B & Trade

Schedule B

7318-15-2000

Description

bolts and bolts and their nuts or washers exported in the same shipment

End Use

12110 - Iron and steel products, other

Unit of Quantity

KG

USDA

Yes

(SITC) Standard International Trade Classification

69421

(NAICS) North American Industrial Classification System

332722

Questions & Answers

1. What is the FSCG of the NSN 5306-01-049-4045?

   The FSCG of the NSN 5306-01-049-4045 is 5306

2. Does the NSN 5306-01-049-4045 have a Schedule B code assigned?

   Yes, the Schedule B code is 7318152000

3. Does NSN 5306-01-049-4045 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5306-01-049-4045 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5306-01-049-4045 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

6. When the NSN 5306-01-049-4045 was assigned to the Federal Catalog?

   It was assigned 48 years ago, on Wed, Oct 19, 1977