NSN BBA-702-2

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

unable to decode frequency rating, 0.406 inches nominal body length, 0.203 inches nominal body outside diameter, fixed inductance type, unable to decode dc resistance rating in ohms.

NSN 5950-00-174-1050 Datasheet

(NSN) National Stock Number

5950-00-174-1050

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5950 - Coils and Transformers

(NIIN) National Item Identification Number

00-174-1050

Requires Demilitarization

Yes

(INC) Item Name Code

00724

Date

Sun, Feb 18, 1973

Schedule B Code

8504900020

Body Length

0.406 inches nominal

Body Outside Diameter

0.203 inches nominal

Dc Resistance Rating In Ohms

unable to decode

Frequency Rating

unable to decode

Inductance Type

fixed

Inclosure Type

fully inclosed

Mounting Method

unable to decode

Rating Method

unable to decode

Reliability Indicator

not established

Terminal Type And Quantity

2 wire lead

Winding Quantity

unable to decode

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Source of Supply Code

S9E - Defense supply center columbus, columbus, oh 43218

Pseudo Item Name Code

0000724

Cross Reference

CAGE Codes

80103

Veeco Instruments Inc Lambda Div

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35355

Water Commodity

595 - Transformer, (machinery and parts),(less than 35 feet)

National Motor Freight Classification Item Number

063420

Schedule B & Trade

Schedule B

8504-90-0020

Description

transformer parts

End Use

20000 - Generators, accessories

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77129

(NAICS) North American Industrial Classification System

335311

Questions & Answers

1. What is the FSCG of the NSN 5950-00-174-1050?

   The FSCG of the NSN 5950-00-174-1050 is 5950

2. Does the NSN 5950-00-174-1050 have a Schedule B code assigned?

   Yes, the Schedule B code is 8504900020

3. Does NSN 5950-00-174-1050 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5950-00-174-1050 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5950-00-174-1050 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5950-00-174-1050 was assigned to the Federal Catalog?

   It was assigned 53 years ago, on Sun, Feb 18, 1973