NSN BML60388

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

included closed system hull cooling feature, rear auxiliary power takeoff unit location, not included clutch, 1 auxiliary power takeoff unit quantity, 11.5 hp at 2000 rpm brake horsepower at specified rpm.

NSN 2815-01-175-7342 Datasheet

(NSN) National Stock Number

2815-01-175-7342

(FSG) Federal Supply Group

28 - Engines, Turbines, and Components

(FSC) Federal Supply Classification

2815 - Diesel Engines and Components

(NIIN) National Item Identification Number

01-175-7342

Requires Demilitarization

Yes

(INC) Item Name Code

10243

Date

Thu, Apr 5, 1984

Schedule B Code

8409998000

Auxiliary Power Takeoff Unit Location

rear

Auxiliary Power Takeoff Unit Quantity

1

Brake Horsepower At Specified Rpm

11.5 hp at 2000 rpm

Closed System Hull Cooling Feature

included

Clutch

not included

Cooling Medium

air

Crankshaft Rotation Direction

clockwise

Cylinder Arrangement

horizontal opposed w/horizontal crankshaft

Cylinder Quantity

2

Direct Reversible Feature

not included

Dual Ignition System

not included

Electromagnetic Interference Suppression

not provided

Governor Controlled Feature

included

Inclosure Type

fully inclosed

Main Power Takeoff Drive Type

sprocket w/outside bearings

Main Power Takeoff Rotation Direction

clockwise

Piston Action Type

single acting

Mounting Type

base

Reduction Gear

not included

Standard Bore Diameter

3.500 inches

Starting Method

electrical

Stroke Length

3.625 inches

Strokes Per Cycle

4

Supercharger

not included

Transmission

not included

Voltage In Volts

24.0

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Pseudo Item Name Code

0010243

Cross Reference

CAGE Codes

19207

U S Army Tank Automotive Command Amsta-Im-Mm

Government departments or units, including military organizations

06085

Bae Systems Land & Armaments L.p.

U.s./canadian manufacturers

Freight Information

Air Commodity

VZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

1 - Aircraft engine, internal combustion engines and fuel control devices

Uniform Freight Classification Item Number

61410

Water Commodity

593 - Motors and parts, (machinery and parts),(less than 35 feet)

National Motor Freight Classification Item Number

120800

Schedule B & Trade

Schedule B

8409-99-8000

Description

parts for compression-ignition internal combustion piston engines (diesel), nesoi

End Use

21100 - Industrial engines

Unit of Quantity

KG

USDA

Yes

(SITC) Standard International Trade Classification

71392

(NAICS) North American Industrial Classification System

333618

Questions & Answers

1. What is the FSCG of the NSN 2815-01-175-7342?

   The FSCG of the NSN 2815-01-175-7342 is 2815

2. Does the NSN 2815-01-175-7342 have a Schedule B code assigned?

   Yes, the Schedule B code is 8409998000

3. Does NSN 2815-01-175-7342 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 2815-01-175-7342 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 2815-01-175-7342 contain hazardous materials?

   Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

6. When the NSN 2815-01-175-7342 was assigned to the Federal Catalog?

   It was assigned 42 years ago, on Thu, Apr 5, 1984