NSN BR409519

A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

50.0 nominal impedance rating in ohms, 4.875 inches nominal overall height, 6.750 inches nominal overall width, 25.000 inches nominal overall length, +0.500 to 1.600 gigahertz frequency range rating.

NSN 5985-00-296-1250 Datasheet

(NSN) National Stock Number

5985-00-296-1250

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5985 - Related Equipment, Waveguides and Antennas

(NIIN) National Item Identification Number

00-296-1250

Requires Demilitarization

Yes

(INC) Item Name Code

00335

Date

Sun, Jan 1, 1961

Schedule B Code

9030330080

Frequency Range Rating

+0.500 to 1.600 gigahertz

Impedance Rating In Ohms

50.0 nominal

Overall Height

4.875 inches nominal

Overall Length

25.000 inches nominal

Overall Width

6.750 inches nominal

Power Rating

10.000 kilowatts peak and 1.000 kilowatts average

Termination Type

connection coaxial

Identification

Demilitarization Code

D - Usml or ccl military items - demil required. Destroy item and components to prevent restoration or repair to a usable condition. (note 5).

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Source of Supply Code

N35 -

Pseudo Item Name Code

0000335

Cross Reference

CAGE Codes

64959

American Telephone and Telegraph Co

U.s./canadian manufacturers

70408

At and T Corp

U.s./canadian manufacturers

80058

Joint Electronics Type Designation System

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

Less than Carload Rating

W - Rating variable

National Motor Freight Class Rating

W - Rating variable

Rail Variation

1

Special Handling

5 - Low sensitivity, category iv, aa&e, unclassified

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35120

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

062920

Schedule B & Trade

Schedule B

9030-33-0080

Description

instruments and apparatus for measuring or checking power, without a recording device, nesoi

End Use

21160 - Measuring, testing, control instruments

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

87475

(NAICS) North American Industrial Classification System

334515

Questions & Answers

1. What is the FSCG of the NSN 5985-00-296-1250?

   The FSCG of the NSN 5985-00-296-1250 is 5985

2. Does the NSN 5985-00-296-1250 have a Schedule B code assigned?

   Yes, the Schedule B code is 9030330080

3. Does NSN 5985-00-296-1250 require demilitarization?

   Usml or ccl military items - demil required. Destroy item and components to prevent restoration or repair to a usable condition. (note 5).

4. Does NSN 5985-00-296-1250 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5985-00-296-1250 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5985-00-296-1250 was assigned to the Federal Catalog?

   It was assigned 65 years ago, on Sun, Jan 1, 1961