NSN BSB-326

A grouping of two or more different types of electrical/electronic components mounted on a common mounting. It may include an assembly of electrical/electronic components mounted on multiple printed wiring board(s) mounted back to back, stacked, and the like. The item is generally a component of a subassembly and cannot be assigned a more definite item name. Excludes:items which may be identified as a subassembly. For an assembly of electrical/electronic components mounted on a single printed wiring board, see circuit card asseembly. Do not use if a more specific name applies.

an/uys-1 advanced signal processor end item identification, 0.406 inches maximum body height, 0.350 inches maximum body outside diameter, fully inclosed inclosure type, unable to decode impedance rating in ohms.

NSN 5950-01-182-0185 Datasheet

(NSN) National Stock Number

5950-01-182-0185

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5950 - Coils and Transformers

(NIIN) National Item Identification Number

01-182-0185

Requires Demilitarization

Yes

(INC) Item Name Code

00780

Date

Tue, Jun 19, 1984

Schedule B Code

8548900100

End Item Identification

an/uys-1 advanced signal processor

Body Height

0.406 inches maximum

Body Outside Diameter

0.350 inches maximum

Impedance Rating In Ohms

unable to decode

Inclosure Type

fully inclosed

Maximum Operating Temp

125.0 celsius

Mounting Method

unable to decode

Precious Material

gold

Precious Material And Location

terminals gold

Reliability Indicator

not established

Terminal Type And Quantity

7 wire lead

Winding Function And Quantity

Winding Operating Current

unable to decode

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

G - Item contains gold.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000780

Cross Reference

CAGE Codes

15634

Magnetika Inc

U.s./canadian manufacturers

80223

United Transformer Corp Sub of Opt Industries Inc

U.s./canadian manufacturers

31669

Pico Electronics Inc

U.s./canadian manufacturers

07421

L3harris Interstate Electronics Corporation

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35355

Water Commodity

595 - Transformer, (machinery and parts),(less than 35 feet)

National Motor Freight Classification Item Number

063420

Questions & Answers

1. What is the FSCG of the NSN 5950-01-182-0185?

   The FSCG of the NSN 5950-01-182-0185 is 5950

2. Does the NSN 5950-01-182-0185 have a Schedule B code assigned?

   Yes, the Schedule B code is 8548900100

3. Does NSN 5950-01-182-0185 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5950-01-182-0185 contain precious materials?

   Item contains gold.

5. Does NSN 5950-01-182-0185 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5950-01-182-0185 was assigned to the Federal Catalog?

   It was assigned 42 years ago, on Tue, Jun 19, 1984