NSN BZ2RDA2

A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see axle(1), shouldered. For items not having any of the above conditions see pin, shoulder, headless. Excludes:shaft(1), straight; and axle(1), straight.

0.020 pretravel inches maximum and 0.052 overtravel inches minimum and 0.0020 differential inches maximum actuator movement, 0.229 inches minimum and 0.239 inches maximum actuator diameter, pushbutton actuator adapter style, round actuator style, 0.839 inches minimum and 0.849 inches maximum body height.

NSN 5930-00-241-8955 Datasheet

(NSN) National Stock Number

5930-00-241-8955

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

00-241-8955

Requires Demilitarization

Yes

(INC) Item Name Code

00399

Date

Sun, Jan 1, 1961

Schedule B Code

8536509050

Actuator Adapter Style

pushbutton

Actuator Diameter

0.229 inches minimum and 0.239 inches maximum

Actuator Style

round

Actuator Movement

0.020 pretravel inches maximum and 0.052 overtravel inches minimum and 0.0020 differential inches maximum

Body Height

0.839 inches minimum and 0.849 inches maximum

Body Length

1.933 inches minimum and 1.943 inches maximum

Body Style

hole mounted

Body Width

0.683 inches minimum and 0.693 inches maximum

Center To Center Distance Between Housing Mounting Facilities Parallel To Width

0.995 inches minimum and 1.005 inches maximum

Center To Center Distance Between Mounting Facilities Parallel To Length

0.995 inches minimum and 1.002 inches maximum

Contact Load Current Rating At Maximum Rated Voltage

250.000 milliamperes resistive dc and 15.000 amperes resistive ac

Inclosure Type

fully inclosed

Maximum Voltage Rating In Volts

460.0 ac and 250.0 dc

Mounting Method

unthreaded hole(s)

Nonpile-Up Contact Arrangement

unable to decode

Overall Height

0.839 inches minimum and 0.849 inches maximum

Overall Length

1.933 inches minimum and 1.943 inches maximum

Overall Width

0.683 inches minimum and 0.693 inches maximum

Switch Release Force

4.0 ounces minimum

Switch Actuating Force

13.0 ounces maximum

Terminal Type And Quantity

3 screw

Unthreaded Mounting Hole Diameter

0.139 inches minimum and 0.142 inches maximum

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000399

Cross Reference

CAGE Codes

80064

Naval Ship Systems Command

U.s./canadian manufacturers

80207

C and K Components Inc Clayton/unimax Div

U.s./canadian manufacturers

70487

Ameridrives International Llc Dba Ameridrives International Llc

U.s./canadian manufacturers

A00AM

E.c.a Etablissement Central des Approvisionnements des Forces Armees Royales

Military standards and standards organizations (ex:stanags,milspecs,defstans)

10001

Navair and Navsea Managed Original Design Activity Dwg Not Material/parts Supplier

U.s./canadian manufacturers

K6596

Honeywell Control Systems Ltd

Non-us manufacturer (nato), other foreign organization or codification bureaus

U4042

Honeywell Control Systems Ltd Div Automation & Control Solutions - Service

Non-us manufacturer (nato), other foreign organization or codification bureaus

24280

Gellman Mfg Co

U.s./canadian manufacturers

91929

Honeywell International Inc. Dba Honeyweel Sensing & Controls

U.s./canadian manufacturers

K7509

Sss Gears Ltd

Non-us manufacturer (nato), other foreign organization or codification bureaus

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8536-50-9050

Description

switches, slide, for a voltage not exceeding 1,000 v

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77255

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5930-00-241-8955?

   The FSCG of the NSN 5930-00-241-8955 is 5930

2. Does the NSN 5930-00-241-8955 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536509050

3. Does NSN 5930-00-241-8955 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-00-241-8955 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5930-00-241-8955 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-00-241-8955 was assigned to the Federal Catalog?

   It was assigned 65 years ago, on Sun, Jan 1, 1961