NSN C07752F

An assembly of fiber rope with or without terminal attachments in a continuous run from end to end. (if without attachments, one end must terminate in a loop.) it may contain intermediate and/or end attachments such as sliding or fixed ring(s) or hook(s).

w/o mtg facilities terminal(s) on one surface body style, 0.150 inches minimum and 0.310 inches maximum body height, 0.690 inches minimum and 0.790 inches maximum body length, 0.880 inches maximum body width, 7500.000 picofarads single section capacitance value per section.

NSN 5910-01-061-1835 Datasheet

(NSN) National Stock Number

5910-01-061-1835

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5910 - Capacitors

(NIIN) National Item Identification Number

01-061-1835

Requires Demilitarization

Yes

(INC) Item Name Code

00005

Date

Wed, Jun 14, 1978

Schedule B Code

8532290020

Body Height

0.150 inches minimum and 0.310 inches maximum

Body Length

0.690 inches minimum and 0.790 inches maximum

Body Style

w/o mtg facilities terminal(s) on one surface

Body Width

0.880 inches maximum

Capacitance Value Per Section

7500.000 picofarads single section

Center To Center Distance Between Terminals Parallel To Length

0.425 inches nominal

Dissipation Factor At Reference Temp In Percent

0.0012

Insulation Resistance At Maximum Operating Temp

33.0 megohm-microfarads

Insulation Resistance At Reference Temp

100000.0 megohms

Material

plastic case

Nonderated Operating Temp

-55.0 celsius minimum and 125.0 celsius maximum

Nonderated Continuous Voltage Rating And Type Per Section

500.0 dc single section

Reliability Failure Rate Level In Percent

0.0100

Reliability Indicator

established

Schematic Diagram Designator

no common or grounded electrode(s)

Specification/Standard Data

81349-mil-c-39001/5 government specification

Temp Coefficient Of Capacitance Range Per Section In Ppm Per Deg Celsius

+0.0 to 70.0 single section

Terminal Diameter

0.040 inches nominal

Terminal Length

1.000 inches minimum

Terminal Surface Treatment

solder

Terminal Type And Quantity

2 uninsulated wire lead

Test Data Document

"81349-mil-c-39001 specification (includes engineering type bulletins, brochures,etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "nominal", etc.)."

Tolerance Range Per Section

-2.00 to 2.00 percent single section

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000005

Cross Reference

CAGE Codes

13499

Rockwell Collins, Inc. Dba Collins Aerospace Government Systems Div Collins Aerospace - Government Systems

U.s./canadian manufacturers

34764

Scientific Radio Systems Inc

U.s./canadian manufacturers

81349

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

72136

Electro Motive Corp Subsidiary of International Electronics Corp

U.s./canadian manufacturers

00853

Cornell-Dubilier Marketing Inc

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34450

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061400

Schedule B & Trade

Schedule B

8532-29-0020

Description

fixed capacitors, mica dielectric, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77867

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5910-01-061-1835?

   The FSCG of the NSN 5910-01-061-1835 is 5910

2. Does the NSN 5910-01-061-1835 have a Schedule B code assigned?

   Yes, the Schedule B code is 8532290020

3. Does NSN 5910-01-061-1835 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5910-01-061-1835 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5910-01-061-1835 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5910-01-061-1835 was assigned to the Federal Catalog?

   It was assigned 48 years ago, on Wed, Jun 14, 1978