NSN C10010-5

Two or more diode semiconductor devices designed to function as a unit in changing alternating current to direct current. The diode devices are internally connected in series, and are permanently cased, encapsulated, potted, or molded together to form an inseparable unit. These units may be designed as either half-wave or full-wave rectifiers and may be mounted to form either single phase or three phase bridges. For interconnected items arranged in stack(s), see rectifier, semiconductor device. For items fabricated in the form of a monolithic or thin film structure that perform the function of a circuit, see integrated circuit (as modified). Excludes:semiconductor devices, unitized; semiconductor device assembly; and rectifier network, unitized.

at each pole actuator position designation, magnetic blowout arc quenching method, multipole-multiple actuator type body style, trip-reset actuator function, 2.490 inches minimum and 2.510 inches maximum body length.

NSN 5925-01-192-7253 Datasheet

(NSN) National Stock Number

5925-01-192-7253

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5925 - Circuit Breakers

(NIIN) National Item Identification Number

01-192-7253

Requires Demilitarization

Yes

(INC) Item Name Code

00136

Date

Thu, Oct 25, 1984

Schedule B Code

8536200040

Actuator Function

trip-reset

Actuator Position Designation

at each pole

Arc Quenching Method

magnetic blowout

Body Length

2.490 inches minimum and 2.510 inches maximum

Body Style

multipole-multiple actuator type

Body Width

1.480 inches minimum and 1.520 inches maximum

Boss Height

0.130 inches minimum and 0.150 inches maximum

Center To Center Distance Between Terminals Parallel To Length

1.928 inches minimum and 1.948 inches maximum

Center To Center Distance Between Terminals Parallel To Width

0.740 inches minimum and 0.760 inches maximum

Circuit Protection Type

overcurrent first location

Distance Between Centerlines Of Mounting Facilities Parallel To Body Width

0.740 inches minimum and 0.760 inches maximum

Distance Between Centerlines Of Mounting Facilities Parallel To Body Length

2.052 inches minimum and 2.072 inches maximum

External Actuator Linkage Arrangement

one and two linked

Fragility Factor

moderately rugged

Frequency In Hertz

400.0 first location

Inclosure Protection Type For Which Designed

general purpose

Internal Trip Release Configuration

relay trip second location

Internal Trip Release Configuration

series trip first location

Main Contact Tripping Mechanism Type

trip free

Manual Actuator Type And Quantity

2 toggle

Material

plastic case

Maximum Continuous Load Current Rating Per Pole

15.0 amperes dc second location

Maximum Continuous Load Current Rating Per Pole

15.0 amperes ac first location

Maximum Interrupting Capacity Current Type And Rating Per Pole In Amps

1000.0 dc second location

Maximum Interrupting Capacity Current Type And Rating Per Pole In Amps

1000.0 ac first location

Mounting Facility Type And Quantity

4 clip

Mounting Surface To Terminal End Distance

2.850 inches maximum

Operating Voltage Type And Rating Per Pole In Volts

250.0 ac first location

Operating Voltage Type And Rating Per Pole In Volts

28.0 dc second location

Pole Quantity

2

Reset Method

manual

Special Features

pole 2 circuit protection type is major voltage loss or no voltage

Storage Type

general purpose warehouse

Terminal Type And Quantity

6 threaded stud

Trip Release Characteristic

instantaneous second location

Trip Release Characteristic

time delay first location

Trip Release Method

magnetic all locations

Trip Delay Time In Seconds Per Rated Continuous Current

2.000 maximum at 200 pct first location

Ultimate Trip Rating Of Continuous Current Rating Per Pole In Percent

125.0 all locations

Unpackaged Unit Weight

6.500 ounces nominal

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000136

Cross Reference

CAGE Codes

74193

Eaton Corp Heinemann Products Commercial Controls Div

U.s./canadian manufacturers

L3330

Heinemann Electric Canada Incdivision of Eaton Corp

Non-us manufacturer (nato), other foreign organization or codification bureaus

81755

Lockheed Martin Corporation Div Lockheed Martin Aeronautics Company

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

35205

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

063160

Schedule B & Trade

Schedule B

8536-20-0040

Description

automatic circuit breakers, for a voltage not exceeding 1,000 v, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77252

(NAICS) North American Industrial Classification System

335313

Questions & Answers

1. What is the FSCG of the NSN 5925-01-192-7253?

   The FSCG of the NSN 5925-01-192-7253 is 5925

2. Does the NSN 5925-01-192-7253 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536200040

3. Does NSN 5925-01-192-7253 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5925-01-192-7253 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5925-01-192-7253 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5925-01-192-7253 was assigned to the Federal Catalog?

   It was assigned 41 years ago, on Thu, Oct 25, 1984