1. Home /
  2. FSC NSN Catalog /
  3. Switches /
  4. C100U2

NSN C100U2

Push Switch

A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of either a thin layer of conductive material, containing either binders or insulating materials, deposited on an insulated form; or an alloy of metal and ceramic materials, usually fused to an insulated form. Opposition to the flow of current is an inherent property of the materials used and is manifest by the heat dissipation in the resistor. See also attenuator, fixed and resistor, fixed, composition. Excludes:carbon composition type resistors.

0.312 inches nominal bushing length, 0.750 inches nominal body diameter, 0.312 inches nominal actuator length, 1.375 inches nominal body length, 17.000 amperes resistive dc and 7.500 amperes resistive ac contact load current rating at maximum rated voltage.

NSN 5930-00-259-9690 Datasheet

(NSN) National Stock Number
5930-00-259-9690
(FSC) Federal Supply Classification
5930 - Switches
(NIIN) National Item Identification Number
00-259-9690
Requires Demilitarization
Yes
(INC) Item Name Code
00406
Date
Fri, Jan 1, 1960
Schedule B Code
8536509035
Actuator Length
0.312 inches nominal
Body Diameter
0.750 inches nominal
Body Length
1.375 inches nominal
Bushing Length
0.312 inches nominal
Contact Load Current Rating At Maximum Rated Voltage
17.000 amperes resistive dc and 7.500 amperes resistive ac
Inclosure Type
uninclosed
Maximum Voltage Rating In Volts
230.0 ac and 24.0 dc
Nominal Thread Size
0.625 inches
Nonpile-Up Contact Arrangement
unable to decode
Terminal Type And Quantity
2 tab, solder lug
Thread Quantity Per Inch
27
Thread Series Designator
uns

Identification

Demilitarization Code
A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.
Precious Metals Indicator
U - Precious metal content is unknown
Hazardous Metals Indicator
P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
Pseudo Item Name Code
0000406

Cross Reference

CAGE Codes

81640
Safran Power Usa, Llc
U.s./canadian manufacturers

Freight Information

Air Commodity
HZ -
Air Dimension
A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
Less than Carload Rating
P - 77.5
National Motor Freight Class Rating
M - 85.0
Special Handling
9 - Other or no special handling required (sh)
Type of Cargo
Z - No special type of cargo code applicable
Uniform Freight Classification Item Number
34430
Water Commodity
658 - Electrical appliances, small
National Motor Freight Classification Item Number
061360

Schedule B & Trade

Schedule B
8536-50-9035
Description
switches, push-button, rated at over 5 a, for a voltage not exceeding 1,000 v
End Use
20005 - Electric apparatus
Unit of Quantity
NO
USDA
Yes
(SITC) Standard International Trade Classification
77255
(NAICS) North American Industrial Classification System
335931

Questions & Answers

  1. What is the FSCG of the NSN 5930-00-259-9690?

    The FSCG of the NSN 5930-00-259-9690 is 5930

  2. Does the NSN 5930-00-259-9690 have a Schedule B code assigned?

    Yes, the Schedule B code is 8536509035

  3. Does NSN 5930-00-259-9690 require demilitarization?

    Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

  4. Does NSN 5930-00-259-9690 contain precious materials?

    Precious metal content is unknown

  5. Does NSN 5930-00-259-9690 contain hazardous materials?

    Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

  6. When the NSN 5930-00-259-9690 was assigned to the Federal Catalog?

    It was assigned 66 years ago, on Fri, Jan 1, 1960

Globe Transparent
Get in Touch
Looking for technical parts, product details, or custom project planning? Our team has you covered with end-to-end support every step of the way.
Contact Us

Pricing & Availability

Send us a request for quote using the form below. Our team will contact you with an up to date pricing and availability quote ASAP.