NSN C11101D

A switch which is externally actuated by a thumbwheel and/or pushbutton. A legend or message is visually displayed at each position of the indicating wheel which corresponds to electrically coded output. Electrically coded output is achieved by rotating a set of brush contacts permanently attached to the code indicating wheel, against a stationary commutator which is usually a printed wiring board having electrical pads or contacts which are interconnected by the rotating brush contacts. May have additional electrical components (such as resistors, capacitors, diodes) premounted on that portion of printed wiring board which extends beyond the back of switch housing.

450.0 highest ac voltage rating at sea level contact voltage rating in volts, 10.0 amperes resistive load lowest ac voltage rating at sea level contact load current rating, 125.0 lowest ac voltage rating at sea level contact voltage rating in volts, breaks before makes each section front contact switching action, 3.0 amperes resistive load highest ac voltage rating at sea level contact load current rating.

NSN 5930-00-296-4499 Datasheet

(NSN) National Stock Number

5930-00-296-4499

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

00-296-4499

Requires Demilitarization

Yes

(INC) Item Name Code

02134

Date

Tue, Jan 1, 1963

Schedule B Code

8536509025

Contact Load Current Rating

10.0 amperes resistive load lowest ac voltage rating at sea level

Contact Load Current Rating

3.0 amperes resistive load highest ac voltage rating at sea level

Contact Switching Action

breaks before makes each section front

Contact Voltage Rating In Volts

125.0 lowest ac voltage rating at sea level

Contact Voltage Rating In Volts

450.0 highest ac voltage rating at sea level

Features Provided

actuator knob

First Flat Length

0.438 inches nominal single actuator

Flat Height

0.219 inches nominal single actuator

Individual Section Quantity

10

Knob Manufacturer Code

82121

Mounting Facility Circle Radius

2.312 inches nominal single mounting facility

Mounting Facility Pattern

four position circular single mounting facility

Mounting Method

threaded hole(s) single mounting facility

Nominal Thread Size

0.190 inches single mounting facility

Overall Height

2.500 inches nominal

Overall Length

5.000 inches nominal

Overall Width

2.500 inches nominal

Shaft Diameter

0.250 inches nominal single actuator

Shaft Length

1.500 inches nominal single actuator

Shaft Type

round, flatted, threaded hole single actuator

Style Designator

tap, circuit selector

Switch Actuator Indexing Position Quantity

4 single actuator

Switch Actuator Positioning Increment

90.0 degrees single actuator

Switch Contact Basic Design

nonpile-up symmetrical

Terminal Type

tab w/screw

Thread Class

2b single mounting facility

Thread Quantity Per Inch

24 single mounting facility

Thread Series Designator

unified national coarse (unc) single mounting facility

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0002134

Cross Reference

CAGE Codes

82121

Electro Switch Corp. Dba Electro Switch Corp

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8536-50-9025

Description

switches, rotary, rated at over 5 a, for a voltage not exceeding 1,000 volts

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77255

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5930-00-296-4499?

   The FSCG of the NSN 5930-00-296-4499 is 5930

2. Does the NSN 5930-00-296-4499 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536509025

3. Does NSN 5930-00-296-4499 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-00-296-4499 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5930-00-296-4499 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-00-296-4499 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963