NSN C1406

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

1 axle speed quantity, 1 battery quantity, conventional axle drive type, hydraulic brake actuation method, 12.0 battery voltage rating in volts.

NSN 2320-00-752-9812 Datasheet

(NSN) National Stock Number

2320-00-752-9812

(FSG) Federal Supply Group

23 - Ground Effect Vehicles, Motor Vehicles, Trailers, and Cycles

(FSC) Federal Supply Classification

2320 - Wheeled Trucks and Truck Tractors

(NIIN) National Item Identification Number

00-752-9812

Requires Demilitarization

Yes

(INC) Item Name Code

11357

Date

Fri, Mar 8, 1968

Schedule B Code

8705900000

Axle Drive Type

conventional

Axle Speed Quantity

1

Battery Quantity

1

Battery Voltage Rating In Volts

12.0

Brake Actuation Method

hydraulic

Cylinder Quantity

6

Drive Axle Location

rear

Door Construction

sedan

Drive Wheel Quantity

2

Engine Brake Horsepower

135.0

Engine Horsepower Rating Speed In Rpm

4000.0

Engine Inclosure Type

vehicle body

Forward Speed Quantity

3

Front Wheel Tread Nominal Width

63.12 inches

Passenger Door Quantity

4

Nominal Wheelbase

115.00 inches

Rated Load Capacity

0.50 tons

Rear Wheel Tread Nominal Width

61.00 inches

Reference Number Differentiating Characteristics

as differentiated by item name and year model 1961

Seating Capacity

10

Transmission Type

manual

Wheel Quantity

4

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

Y - Indicates information is in the hazardous materials information resource system (hmirs).

Pseudo Item Name Code

0011357

Cross Reference

CAGE Codes

08664

Bristol Babcock Inc Instruments-Systems Div Sub of Babcock Intl Inc

U.s./canadian manufacturers

11862

General Motors Corp Chevrolet Motor Div Special Products Dept

U.s./canadian manufacturers

55901

Dare Electronics, Inc.

U.s./canadian manufacturers

7X677

General Motors Llc Dba General Motors Llc

U.s./canadian manufacturers

Freight Information

Air Commodity

VD -

Air Dimension

Z - Shipment is not a consolidation, but does exceed 84 inches in one or more dimensions.

National Motor Freight Class Rating

F - 150.0

Rail Variation

1

Special Handling

D - Moderate sensitivity, category iii, aa&e, unclassified

Type of Cargo

R - Flammable liquids, un class 3 (flammable liquids label)

Uniform Freight Classification Item Number

93340

Water Commodity

891 - Vehicles, designed for materials handling in and around airfields, terminals and depots; including trucks, tractors, trailers, and stackers (see 829)

National Motor Freight Classification Item Number

190190

Schedule B & Trade

Schedule B

8705-90-0000

Description

special purpose vehicles, nesoi

End Use

30100 - Trucks, buses and special purpose vehicles

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

78229

(NAICS) North American Industrial Classification System

336120

Questions & Answers

1. What is the FSCG of the NSN 2320-00-752-9812?

   The FSCG of the NSN 2320-00-752-9812 is 2320

2. Does the NSN 2320-00-752-9812 have a Schedule B code assigned?

   Yes, the Schedule B code is 8705900000

3. Does NSN 2320-00-752-9812 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 2320-00-752-9812 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 2320-00-752-9812 contain hazardous materials?

   Indicates information is in the hazardous materials information resource system (hmirs).

6. When the NSN 2320-00-752-9812 was assigned to the Federal Catalog?

   It was assigned 58 years ago, on Fri, Mar 8, 1968