NSN C2112

An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes:undercut for thread relief). It is no. 0 (0.060 in.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below no. 10 (0.190 in.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also bolt, externally relieved body and bolt, internal wrenching.

0.500 dissipation factor at reference temp in percent, 0.600 inches maximum body length, 0.232 inches maximum body diameter, 0.010 microfarads single section capacitance value per section, w/o mtg facilities, axial terminals body style.

NSN 5910-00-910-4107 Datasheet

(NSN) National Stock Number

5910-00-910-4107

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5910 - Capacitors

(NIIN) National Item Identification Number

00-910-4107

Requires Demilitarization

Yes

(INC) Item Name Code

00006

Date

Fri, Jan 1, 1960

Schedule B Code

8532250080

Body Diameter

0.232 inches maximum

Body Length

0.600 inches maximum

Body Style

w/o mtg facilities, axial terminals

Capacitance Value Per Section

0.010 microfarads single section

Dissipation Factor At Reference Temp In Percent

0.500

Dielectric Material

plastic polyethylene terephthalate (pet)

Internal Electrical Connection Type

extended foil

Insulation Resistance At Reference Temp

50000.0 megohm-microfarads

Material

plastic case

Nonderated Operating Temp

-55.0 celsius minimum and 85.0 celsius maximum

Nonderated Continuous Voltage Rating And Type Per Section

100.0 dc single section

Reliability Indicator

not established

Schematic Diagram Designator

no common or grounded electrode(s)

Terminal Diameter

0.020 inches nominal

Terminal Length

1.000 inches minimum

Terminal Surface Treatment

solder

Terminal Type And Quantity

2 uninsulated wire lead

Tolerance Range Per Section

-10.00 to 0.00 percent single section

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Source of Supply Code

S9E - Defense supply center columbus, columbus, oh 43218

Pseudo Item Name Code

0000006

Cross Reference

CAGE Codes

14304

L3harris Technologies, Inc. Dba Harris Corp Div Harris Defense Communications

U.s./canadian manufacturers

78286

Sikorsky Aircraft Corporation Dba Sikorsky Aircraft Corp

U.s./canadian manufacturers

97424

Ametek Inc Div Aerospace and Defense

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34450

Water Commodity

658 - Electrical appliances, small

National Motor Freight Classification Item Number

061400

Schedule B & Trade

Schedule B

8532-25-0080

Description

fixed capacitors, dielectric of paper or plastic, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77866

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5910-00-910-4107?

   The FSCG of the NSN 5910-00-910-4107 is 5910

2. Does the NSN 5910-00-910-4107 have a Schedule B code assigned?

   Yes, the Schedule B code is 8532250080

3. Does NSN 5910-00-910-4107 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5910-00-910-4107 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5910-00-910-4107 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5910-00-910-4107 was assigned to the Federal Catalog?

   It was assigned 66 years ago, on Fri, Jan 1, 1960