NSN C30911

A grouping of two or more physically connected or related electrical an/or electronic parts capable of dissassemblage. Each component of the assemblage must be capable of functioning in accordance with its own item name. Consists of a single printed circuit board or terminal board upon which are mounted separately manufactured electronic components such as capacitors, inductors, resistors, and the like. It may also include printed electronic components. The item is generally part of a subassembly and cannot be assigned a more definite item name. For items having a complete individual electrical/electronic function, use applicable item name such as amplifier (as modified); power supply; or the like. For items not having a complete individual electrical/electronic function, see applicable subassembly name, such as amplifier subassembly; power supply subassembly; or the like. For an assembly of electrical/electronic components mounted on other than a single printed wiring board, see electronic components assembly. Excludes:printed circuit board

unable to decode contact load current rating, 30.0 amperes resistive load ac at sea level contact load current rating, breaks before makes each section rear contact switching action, 30.0 amperes resistive load dc at sea level contact load current rating, 250.0 dc at sea level contact voltage rating in volts.

NSN 5930-00-854-4579 Datasheet

(NSN) National Stock Number

5930-00-854-4579

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

00-854-4579

Requires Demilitarization

Yes

(INC) Item Name Code

02134

Date

Mon, Jan 1, 1962

Schedule B Code

8536509025

Contact Load Current Rating

unable to decode

Contact Load Current Rating

30.0 amperes resistive load ac at sea level

Contact Load Current Rating

30.0 amperes resistive load dc at sea level

Contact Switching Action

breaks before makes each section rear

Contact Voltage Rating In Volts

250.0 dc at sea level

Contact Voltage Rating In Volts

500.0 ac at sea level

Features Provided

actuator knob

First Flat Length

0.500 inches nominal single actuator

Flat Height

0.312 inches nominal single actuator

Hazardous Locations/Environmental Protection

dustproof

Individual Section Quantity

7

Knob Manufacturer Code

82121

Mounting Facility Circle Radius

1.609 inches nominal single mounting facility

Mounting Facility Pattern

four position circular single mounting facility

Mounting Method

bracket(s) and threaded hole(s) single mounting facility

Nominal Thread Size

0.250 inches single mounting facility

Overall Height

4.125 inches nominal

Overall Length

5.250 inches nominal

Pole Quantity

1 each section rear

Shaft Diameter

0.375 inches nominal single actuator

Shaft Type

round, flatted, threaded hole single actuator

Shaft Length

0.750 inches nominal single actuator

Style Designator

tap, circuit selector

Switch Actuator Indexing Position Quantity

4 single actuator

Switch Actuator Positioning Increment

90.0 degrees single actuator

Switch Actuator Stop Device Type

fixed stop single actuator

Switch Contact Basic Design

nonpile-up symmetrical

Terminal Type

screw

Thread Class

2b single mounting facility

Thread Quantity Per Inch

20 single mounting facility

Thread Series Designator

unified national coarse (unc) single mounting facility

Throw Quantity

4 each section rear

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0002134

Cross Reference

CAGE Codes

82121

Electro Switch Corp. Dba Electro Switch Corp

U.s./canadian manufacturers

92392

Allis-Chalmers Corp

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8536-50-9025

Description

switches, rotary, rated at over 5 a, for a voltage not exceeding 1,000 volts

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77255

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5930-00-854-4579?

   The FSCG of the NSN 5930-00-854-4579 is 5930

2. Does the NSN 5930-00-854-4579 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536509025

3. Does NSN 5930-00-854-4579 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-00-854-4579 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5930-00-854-4579 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-00-854-4579 was assigned to the Federal Catalog?

   It was assigned 64 years ago, on Mon, Jan 1, 1962