NSN C31124

A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see axle(1), shouldered. For items not having any of the above conditions see pin, shoulder, headless. Excludes:shaft(1), straight; and axle(1), straight.

actuator knob features provided, 0.500 inches nominal single actuator first flat length, 500.0 ac at sea level contact voltage rating in volts, breaks before makes each section front contact switching action, 30.0 amperes resistive load ac at sea level contact load current rating.

NSN 5930-00-935-9541 Datasheet

(NSN) National Stock Number

5930-00-935-9541

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

00-935-9541

Requires Demilitarization

Yes

(INC) Item Name Code

02134

Date

Wed, Dec 18, 1968

Schedule B Code

8536509025

Contact Load Current Rating

30.0 amperes resistive load ac at sea level

Contact Switching Action

breaks before makes each section front

Contact Voltage Rating In Volts

500.0 ac at sea level

Features Provided

actuator knob

First Flat Length

0.500 inches nominal single actuator

Flat Height

0.219 inches nominal single actuator

Hazardous Locations/Environmental Protection

dustproof

Individual Section Quantity

5

Knob Manufacturer Code

82121

Knob Manufacturer Part Number

8200-32

Mounting Facility Circle Radius

1.609 inches nominal single mounting facility

Mounting Facility Pattern

four position circular single mounting facility

Mounting Method

bracket(s) and threaded hole(s) single mounting facility

Nominal Thread Size

0.250 inches single mounting facility

Overall Height

2.875 inches nominal

Overall Length

4.250 inches nominal

Overall Width

2.875 inches nominal

Pole Quantity

1 each section front

Shaft Diameter

0.375 inches nominal single actuator

Shaft Type

round, flatted, threaded hole single actuator

Shaft Length

0.875 inches nominal single actuator

Special Features

shaft includes threaded pin located 90 deg from flat of shaft

Style Designator

tap, circuit selector

Switch Actuator Indexing Position Quantity

2 single actuator

Switch Actuator Momentary Position

clockwise and counterclockwise single actuator

Switch Actuator Positioning Increment

90.0 degrees single actuator

Switch Contact Basic Design

nonpile-up symmetrical

Terminal Type

tab w/screw

Thread Class

2b single mounting facility

Thread Quantity Per Inch

20 single mounting facility

Thread Series Designator

unified national coarse (unc) single mounting facility

Throw Quantity

1 each section front

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0002134

Cross Reference

CAGE Codes

82121

Electro Switch Corp. Dba Electro Switch Corp

U.s./canadian manufacturers

90099

Northrop Grumman Systems Corporation Div Marine Systems

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8536-50-9025

Description

switches, rotary, rated at over 5 a, for a voltage not exceeding 1,000 volts

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77255

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5930-00-935-9541?

   The FSCG of the NSN 5930-00-935-9541 is 5930

2. Does the NSN 5930-00-935-9541 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536509025

3. Does NSN 5930-00-935-9541 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-00-935-9541 contain precious materials?

   Item does not contain precious metal.

5. Does NSN 5930-00-935-9541 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-00-935-9541 was assigned to the Federal Catalog?

   It was assigned 57 years ago, on Wed, Dec 18, 1968