NSN C37C151G

An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes:undercut for thread relief). It is no. 0 (0.060 in.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below no. 10 (0.190 in.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also bolt, externally relieved body and bolt, internal wrenching.

0.200 inches nominal body length, 150.000 picofarads single section capacitance value per section, 0.100 inches nominal body height, w/o mtg facilities terminal(s) on one surface body style, 0.200 inches nominal body width.

NSN 5910-01-008-8472 Datasheet

(NSN) National Stock Number

5910-01-008-8472

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5910 - Capacitors

(NIIN) National Item Identification Number

01-008-8472

Requires Demilitarization

Yes

(INC) Item Name Code

00007

Date

Sun, Aug 31, 1975

Schedule B Code

8532290040

Body Height

0.100 inches nominal

Body Length

0.200 inches nominal

Body Width

0.200 inches nominal

Body Style

w/o mtg facilities terminal(s) on one surface

Capacitance Value Per Section

150.000 picofarads single section

Center To Center Distance Between Terminals Parallel To Length

0.200 inches nominal

Insulation Resistance At Reference Temp

100000.0 megohms

Material

plastic case

Nonderated Operating Temp

-55.0 celsius minimum and 125.0 celsius maximum

Nonderated Continuous Voltage Rating And Type Per Section

50.0 dc single section

Power Factor At Reference Temp In Percent

0.1500

Reliability Indicator

not established

Schematic Diagram Designator

no common or grounded electrode(s)

Temp Coefficient Of Capacitance Per Section In Ppm Per Deg Celsius

0.0 single section

Terminal Diameter

0.025 inches nominal

Terminal Length

1.250 inches minimum

Terminal Surface Treatment

solder

Terminal Type And Quantity

2 uninsulated wire lead

Tolerance Range Per Section

-2.00 to 2.00 percent single section

Tolerance Of Temp Coefficient Per Section In Ppm Per Deg Celsius

-30.0 to 30.0 single section

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000007

Cross Reference

CAGE Codes

81413

Bae Systems Information and Electronic Systems Integration Inc. Dba Bae Systems

U.s./canadian manufacturers

72982

Erie Specialty Products Inc

U.s./canadian manufacturers

16546

Mepco/centralab a North American Philips Co

U.s./canadian manufacturers

96733

Sfe Technologies

U.s./canadian manufacturers

93958

Republic Electronics Corp S Inc

U.s./canadian manufacturers

99515

Electron Products Inc

U.s./canadian manufacturers

95275

Vitramon Inc Po Box 544 Bridgeport Ct 06601

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34450

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061400

Schedule B & Trade

Schedule B

8532-29-0040

Description

fixed capacitors, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77867

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5910-01-008-8472?

   The FSCG of the NSN 5910-01-008-8472 is 5910

2. Does the NSN 5910-01-008-8472 have a Schedule B code assigned?

   Yes, the Schedule B code is 8532290040

3. Does NSN 5910-01-008-8472 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5910-01-008-8472 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5910-01-008-8472 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5910-01-008-8472 was assigned to the Federal Catalog?

   It was assigned 51 years ago, on Sun, Aug 31, 1975