NSN C39-1189

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

0.880 in. lg; 0.470 in. h; 0.190 in. thk; two 0.140 in. dia thru and counterbore 0.210 in. dia by 0.060 in. deep holes; 125 microinch finish general characteristics item description, aerodyne research inc eh-109 film processor end item identification.

NSN 6740-01-151-7074 Datasheet

(NSN) National Stock Number

6740-01-151-7074

(FSG) Federal Supply Group

67 - Photographic Equipment

(FSC) Federal Supply Classification

6740 - Photographic Developing and Finishing Equipment

(NIIN) National Item Identification Number

01-151-7074

Requires Demilitarization

Yes

(INC) Item Name Code

77777

Date

Thu, Apr 21, 1983

End Item Identification

aerodyne research inc eh-109 film processor

General Characteristics Item Description

0.880 in. lg; 0.470 in. h; 0.190 in. thk; two 0.140 in. dia thru and counterbore 0.210 in. dia by 0.060 in. deep holes; 125 microinch finish

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

A - Item does not contain precious metal.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

1459816

Cross Reference

CAGE Codes

55572

Aerodyne Products Corp

U.s./canadian manufacturers

Freight Information

Air Commodity

PZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

J - 100.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

19930

Water Commodity

756 - Photo equipment and supplies, other than film or paper (see 759)

National Motor Freight Classification Item Number

039740

Questions & Answers

1. What is the FSCG of the NSN 6740-01-151-7074?

   The FSCG of the NSN 6740-01-151-7074 is 6740

2. Does NSN 6740-01-151-7074 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 6740-01-151-7074 contain precious materials?

   Item does not contain precious metal.

4. Does NSN 6740-01-151-7074 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 6740-01-151-7074 was assigned to the Federal Catalog?

   It was assigned 43 years ago, on Thu, Apr 21, 1983