NSN C5225

A switch that is externally actuated by a device such as a push rod or button, which requires pushing for each actuation. The action may be momentary, with mechanical return. It consists of a body,switch and a push button. The item may include provisions for mounting indicating lamps or light emitting diodes in the actuator. Includes items consisting of individually separable switches that are physically interlocked, that have a common actuator, or are electrically connected. Excludes: light-switch; light-switch assembly; switch,beam selecting,headlight; switch,foot; switch,interlock; switch,pressure; switch,push-pull; switch,sensitive and switch assembly. For devices which start, stop, reverse, select and/or regulate the speed of a motor, see starter,motor and controller,motor.

200.0 milliamperes resistive load ac at sea level contact load current rating, 200.0 milliamperes resistive load dc at sea level contact load current rating, unable to decode contact load current rating, breaks before makes each section rear contact switching action, unable to decode contact switching action.

NSN 5930-01-021-5589 Datasheet

(NSN) National Stock Number

5930-01-021-5589

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5930 - Switches

(NIIN) National Item Identification Number

01-021-5589

Requires Demilitarization

Yes

(INC) Item Name Code

02134

Date

Mon, May 17, 1976

Schedule B Code

8536509025

Contact Load Current Rating

unable to decode

Contact Load Current Rating

200.0 milliamperes resistive load dc at sea level

Contact Load Current Rating

200.0 milliamperes resistive load ac at sea level

Contact Switching Action

breaks before makes each section rear

Contact Switching Action

unable to decode

Contact Voltage Rating In Volts

115.0 ac at sea level

Contact Voltage Rating In Volts

30.0 dc at sea level

Detent Rotational Torque Range

+4.000 to 32.000 inch-ounces single actuator

First Flat Length

0.250 inches nominal single actuator

Flat Height

0.219 inches nominal single actuator

Hazardous Locations/Environmental Protection

explosion proof

Individual Section Quantity

3

Mounting Method

threaded bushing single mounting facility

Nominal Thread Size

0.375 inches single mounting facility

Nonturn Device Type

slotted bushing at 3:00 oclock

Operating Temp Range

-65.0 to 125.0 celsius

Overall Height

0.687 inches nominal

Overall Length

1.884 inches nominal

Overall Width

1.000 inches nominal

Pole Quantity

1 each section front

Precious Material And Location

rotor contact surface gold and terminal surface gold

Precious Material

gold

Rotor Through Connection Quantity

1 each section

Shaft Diameter

0.250 inches nominal single actuator

Shaft Flat/Slot Angular Location

120.0 degrees from nonturn device single actuator

Shaft Type

round, flatted single actuator

Shaft Length

0.375 inches nominal single actuator

Style Designator

circular wafer, bushing mount

Switch Actuator Indexing Position Quantity

12 single actuator

Switch Actuator Momentary Position

counterclockwise single actuator

Switch Actuator Positioning Increment

30.0 degrees single actuator

Switch Actuator Positioning Increment

unable to decode

Switch Contact Basic Design

nonpile-up symmetrical

Terminal Type

printed circuit

Thread Class

2a single mounting facility

Thread Length

0.312 inches nominal single mounting facility

Thread Series Designator

unef single mounting facility

Throw Quantity

12 each section rear

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

G - Item contains gold.

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0002134

Cross Reference

CAGE Codes

81073

Grayhill Inc

U.s./canadian manufacturers

98869

Howell Instruments, Inc. Dba Howell Instruments Inc

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

M - 85.0

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34430

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061360

Schedule B & Trade

Schedule B

8536-50-9025

Description

switches, rotary, rated at over 5 a, for a voltage not exceeding 1,000 volts

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77255

(NAICS) North American Industrial Classification System

335931

Questions & Answers

1. What is the FSCG of the NSN 5930-01-021-5589?

   The FSCG of the NSN 5930-01-021-5589 is 5930

2. Does the NSN 5930-01-021-5589 have a Schedule B code assigned?

   Yes, the Schedule B code is 8536509025

3. Does NSN 5930-01-021-5589 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5930-01-021-5589 contain precious materials?

   Item contains gold.

5. Does NSN 5930-01-021-5589 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5930-01-021-5589 was assigned to the Federal Catalog?

   It was assigned 50 years ago, on Mon, May 17, 1976