NSN C85702

A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

1.750 inches nominal body length, w/mtg tabs/flanges, terminal(s) on one surface body style, 0.500 microfarads single section capacitance value per section, 1.125 inches nominal body height, 1.250 inches nominal body width.

NSN 5910-00-958-3177 Datasheet

(NSN) National Stock Number

5910-00-958-3177

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5910 - Capacitors

(NIIN) National Item Identification Number

00-958-3177

Requires Demilitarization

Yes

(INC) Item Name Code

00003

Date

Wed, May 18, 1966

Schedule B Code

8532250080

Body Height

1.125 inches nominal

Body Length

1.750 inches nominal

Body Style

w/mtg tabs/flanges, terminal(s) on one surface

Body Width

1.250 inches nominal

Capacitance Value Per Section

0.500 microfarads single section

Case Insulation Material

plastic

Distance Between Centerlines Of Mounting Facilities Parallel To Body Length

2.125 inches nominal

Features Provided

hermetically sealed case

Mounting Facility Type And Quantity

2 unthreaded mounting holes

Nonderated Operating Temp

-55.0 celsius minimum and 85.0 celsius maximum

Nonderated Continuous Voltage Rating And Type Per Section

300.0 dc single section

Reliability Indicator

not established

Schematic Diagram Designator

no common or grounded electrode(s)

Terminal Type And Quantity

2 tab, solder lug

Test Data Document

80020-413450 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

Tolerance Range Per Section

-10.00 to 10.00 percent single section

Unthreaded Mounting Hole Diameter

0.187 inches nominal

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

Y - Indicates information is in the hazardous materials information resource system (hmirs).

Hazardous Characteristics Code

Z3 - Article containing polychlorinated biphenyl (pcb)

Pseudo Item Name Code

0000003

Cross Reference

CAGE Codes

80020

Naval Air Warfare Center Aircraft Division Joint Base Jbmdl

U.s./canadian manufacturers

32159

West Cap Arizona

U.s./canadian manufacturers

01884

Exxelia Usa, Inc.

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34450

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061400

Schedule B & Trade

Schedule B

8532-25-0080

Description

fixed capacitors, dielectric of paper or plastic, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77866

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5910-00-958-3177?

   The FSCG of the NSN 5910-00-958-3177 is 5910

2. Does the NSN 5910-00-958-3177 have a Schedule B code assigned?

   Yes, the Schedule B code is 8532250080

3. Does NSN 5910-00-958-3177 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5910-00-958-3177 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5910-00-958-3177 contain hazardous materials?

   Indicates information is in the hazardous materials information resource system (hmirs).

6. When the NSN 5910-00-958-3177 was assigned to the Federal Catalog?

   It was assigned 60 years ago, on Wed, May 18, 1966