NSN CAFB3557E

A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see axle(1), shouldered. For items not having any of the above conditions see pin, shoulder, headless. Excludes:shaft(1), straight; and axle(1), straight.

solid single or composition cross-sectional shape style, 6.000 inches nominal aperture width, 0.438 inches nominal hole diameter, 0.094 inches nominal cross-sectional thickness, 11.500 inches nominal aperture length.

NSN 5330-00-217-0133 Datasheet

(NSN) National Stock Number

5330-00-217-0133

(FSG) Federal Supply Group

53 - Hardware and Abrasives

(FSC) Federal Supply Classification

5330 - Packing and Gasket Materials

(NIIN) National Item Identification Number

00-217-0133

Requires Demilitarization

Yes

(INC) Item Name Code

04522

Date

Sun, Jan 1, 1961

Aperture Length

11.500 inches nominal

Aperture Width

6.000 inches nominal

Cross-Sectional Shape Style

solid single or composition

Cross-Sectional Thickness

0.094 inches nominal

Hole Diameter

0.438 inches nominal

Inside Corner Radius

0.750 inches nominal

Material Document And Classification

unable to decode

Outside Corner Radius

1.438 inches nominal

Overall Length

13.500 inches nominal

Overall Width

8.000 inches nominal

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0004522

Cross Reference

CAGE Codes

7PZX0

Fairbanks Morse, Llc

U.s./canadian manufacturers

82796

Coltec Industries Inc. Dba Fairbanks Morse Engine Div Fairbanks Morse Engine

U.s./canadian manufacturers

D9182

Zf Industrieantriebe Witten Gmbh

Non-us manufacturer (nato), other foreign organization or codification bureaus

16236

Dla Land and Maritime Dba Engineering and Technical Support Div Document Standardization Division (vendor Item Drawings)

Government departments or units, including military organizations

Freight Information

Air Commodity

VZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

W - Rating variable

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

95100

Water Commodity

596 - Gaskets, (machinery and parts),(less than 35 feet)

National Motor Freight Classification Item Number

194120

Questions & Answers

1. What is the FSCG of the NSN 5330-00-217-0133?

   The FSCG of the NSN 5330-00-217-0133 is 5330

2. Does NSN 5330-00-217-0133 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

3. Does NSN 5330-00-217-0133 contain precious materials?

   Precious metal content is unknown

4. Does NSN 5330-00-217-0133 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

5. When the NSN 5330-00-217-0133 was assigned to the Federal Catalog?

   It was assigned 65 years ago, on Sun, Jan 1, 1961