NSN CB21PD270J

An insulator that is essentially thin and flat, with one through hole centrally located. The general shape may vary by the addition of features such as beveled edges, indented surfaces, through hole keys, and/or peripheral flats. The thickness measured between the two parallel bearing surfaces must not exceed 25 percent of the outside diameter or the shortest distance between peripheral flats. The thickness measured between the two parallel bearing surfaces must not exceed 25 percent of the outside diameter or the shortest distance between peripheral flats. Excludes:items with more than one hole. See also insulator, disk; insulator, bead; insulator, bushing; and insulator, plate

27.000 picofarads single section capacitance value per section, button type, w/thd mtg hole/stud body style, 0.450 inches nominal body diameter, 0.375 inches nominal body length, unified national coarse (unc) mounting facility screw thread series designator.

NSN 5910-00-666-5052 Datasheet

(NSN) National Stock Number

5910-00-666-5052

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5910 - Capacitors

(NIIN) National Item Identification Number

00-666-5052

Requires Demilitarization

Yes

(INC) Item Name Code

00005

Date

Tue, Jan 1, 1963

Schedule B Code

8532290020

Body Diameter

0.450 inches nominal

Body Length

0.375 inches nominal

Body Style

button type, w/thd mtg hole/stud

Capacitance Value Per Section

27.000 picofarads single section

Mounting Facility Screw Thread Series Designator

unified national coarse (unc)

Mounting Facility Type And Quantity

1 threaded mounting holes

Nominal Thread Size

0.099 inches

Nonderated Operating Temp

-55.0 celsius minimum and 85.0 celsius maximum

Nonderated Continuous Voltage Rating And Type Per Section

300.0 dc single section

Reliability Indicator

not established

Schematic Diagram Designator

electrode(s) grounded to case, w/gnd terminal

Temp Coefficient Of Capacitance Range Per Section In Ppm Per Deg Celsius

-100.0 to 100.0 single section

Terminal Type And Quantity

2 tab, solder lug

Tolerance Range Per Section

-5.00 to 5.00 percent single section

Identification

Demilitarization Code

A - Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Source of Supply Code

SMS - Defense logistics agency, enterprise business systems

Pseudo Item Name Code

0000005

Cross Reference

CAGE Codes

06141

L3 Aviation Products, Inc. Dba L3 Technologies

U.s./canadian manufacturers

81349

Military Specifications Promulgated by Military Departments/agencies Under Authority of Defense Standardization Manual 4120 3-M

Military standards and standards organizations (ex:stanags,milspecs,defstans)

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

34450

Water Commodity

72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

National Motor Freight Classification Item Number

061400

Schedule B & Trade

Schedule B

8532-29-0020

Description

fixed capacitors, mica dielectric, nesoi

End Use

20005 - Electric apparatus

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

77867

(NAICS) North American Industrial Classification System

334416

Questions & Answers

1. What is the FSCG of the NSN 5910-00-666-5052?

   The FSCG of the NSN 5910-00-666-5052 is 5910

2. Does the NSN 5910-00-666-5052 have a Schedule B code assigned?

   Yes, the Schedule B code is 8532290020

3. Does NSN 5910-00-666-5052 require demilitarization?

   Items subject to the export administration regulations (ear) in parts 730-774 of title 15, code of federal regulations (cfr) (ccli or ear99) and determined by dod to present a low risk when released out of dod control. No demil, mut, or end use certificate is required. May require an export licensefrom doc.

4. Does NSN 5910-00-666-5052 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5910-00-666-5052 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5910-00-666-5052 was assigned to the Federal Catalog?

   It was assigned 63 years ago, on Tue, Jan 1, 1963