NSN CBP167A

A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes:disk, valve, graphite impregnated and lubricated items.

0.860 inches nominal body width, discrimination at specified frequencies per function in decibels, metal body material, 1.000 inches maximum body height, 1.485 inches nominal body length.

NSN 5915-00-948-9161 Datasheet

(NSN) National Stock Number

5915-00-948-9161

(FSG) Federal Supply Group

59 - Electrical and Electronic Equipment Components

(FSC) Federal Supply Classification

5915 - Filters and Networks

(NIIN) National Item Identification Number

00-948-9161

Requires Demilitarization

Yes

(INC) Item Name Code

00209

Date

Mon, Apr 11, 1966

Schedule B Code

8527995030

Body Height

1.000 inches maximum

Body Length

1.485 inches nominal

Body Material

metal

Body Width

0.860 inches nominal

Discrimination At Specified Frequencies Per Function In Decibels

Distance Between Centerlines Of Mounting Facilities Parallel To Body Length

0.785 inches nominal

Frequency Band Width Per Function

248.92 kilohertz blank and 249.02 kilohertz blank

Functional Terminal Type And Quantity

unable to decode

Inclosure Type

encased

Input Impedance Per Function W/Load

1.0 kilohms blank

Insertion Loss At Reference Frequency Per Function In Decibels

3.0 blank

Mounting Facility Screw Thread Series Designator

unified national coarse (unc)

Mounting Facility Type And Quantity

2 threaded stud(s)

Nominal Thread Size

0.112 inches

Operating Temp Range

-40.0 to 85.0 celsius

Output Impedance Per Function W/Source Across Input

1.0 kilohms blank

Overall Height

1.375 inches maximum

Principal Circuitry Type Per Function

crystal blank

Reference Frequency Per Function

248.97 kilohertz blank

Specified Frequencies Of Discrimination Per Function

247.97 kilohertz blank and 248.92 kilohertz blank and 249.02 kilohertz blank and 249.77 kilohertz blank

Style Designator

rectangular terminal/terminals on one surface

Test Data Document

13499-293-1167-020 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)

Vibration Resistance Range In Hertz

+10.0 to 55.0

Identification

Demilitarization Code

D - Usml or ccl military items - demil required. Destroy item and components to prevent restoration or repair to a usable condition. (note 5).

Precious Metals Indicator

U - Precious metal content is unknown

Hazardous Metals Indicator

P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

Pseudo Item Name Code

0000209

Cross Reference

CAGE Codes

13499

Rockwell Collins, Inc. Dba Collins Aerospace Government Systems Div Collins Aerospace - Government Systems

U.s./canadian manufacturers

80294

Bourns Instruments Inc

U.s./canadian manufacturers

Freight Information

Air Commodity

HZ -

Air Dimension

A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.

National Motor Freight Class Rating

P - 77.5

Special Handling

9 - Other or no special handling required (sh)

Type of Cargo

Z - No special type of cargo code applicable

Uniform Freight Classification Item Number

58500

Water Commodity

593 - Motors and parts, (machinery and parts),(less than 35 feet)

National Motor Freight Classification Item Number

061990

Schedule B & Trade

Schedule B

8527-99-5030

Description

reception apparatus, nesoi

End Use

41210 - Stereo equipment, etc.

Unit of Quantity

NO

USDA

Yes

(SITC) Standard International Trade Classification

76289

(NAICS) North American Industrial Classification System

334310

Questions & Answers

1. What is the FSCG of the NSN 5915-00-948-9161?

   The FSCG of the NSN 5915-00-948-9161 is 5915

2. Does the NSN 5915-00-948-9161 have a Schedule B code assigned?

   Yes, the Schedule B code is 8527995030

3. Does NSN 5915-00-948-9161 require demilitarization?

   Usml or ccl military items - demil required. Destroy item and components to prevent restoration or repair to a usable condition. (note 5).

4. Does NSN 5915-00-948-9161 contain precious materials?

   Precious metal content is unknown

5. Does NSN 5915-00-948-9161 contain hazardous materials?

   Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.

6. When the NSN 5915-00-948-9161 was assigned to the Federal Catalog?

   It was assigned 60 years ago, on Mon, Apr 11, 1966